The D1C Capsules Filling Sealing Machine can handle both injected
and thermoformed capsules of different dimensions. In case of
self-protected capsules the machine can also handle them in
modified atmosphere(nitrogen).
The D1C is the reliable and cost effective option, designed for
low/medium production volumes. Easy cleaning operations are
possible thanks to pull-out operating system. According to capsule
configuration tailor-made solutions are possible.
Precise and accurate product dosing into the capsule is performed
by a set of servo controlled augers combined with innovative
sealing systems. Extremely gentle product handing to suit a wide
range of products to be filled (coffee with different densities,
tea and soluble powders)as well as different types of material such
as roll-stock and pre-cut lid. Sturdy construction ensures
consistent, high dosing accuracy Accurate weight is also assured by
an on-line weighing system for each filled capsule with data
feedback to automatically adjust the dosing unit or to reject the
capsules outside the specified weight
ESPRESSO CAPSULE CONFIGURATION
The D1C is able to produce a wide variety of espresso capsule with
lid in modifed atmosphere, handling both stackable and bulk
capsules, inserting plastic or paper filters and sealing different
matenals as top lid.
1. CAPSULE VERTICAL FEEDING SYSTEM
2. DOSING SYSTEM WITH NITROGEN UNIT
3. SINGLE CAPSULE CHECK WEIGHER
4. PRODUCT COMPACTING AND CAPSULE RIM CLEANING UNIT
5. LID CUTTING/TRANSFERRING AND SEALING UNIT
6. EXIT SIDE BELTS AND TRANSFER CLEANING SYSTEM
D1C TECHNICAL DATA
| D1C ESPRESSO CONFIGURATION |
PRODUCTION SPEED 2 LANES PRODUCTION SPEED 4 LANES | 70 capsules /min 140 capsules/min |
| Installed power | 12KW |
| Machine weight | 2300kg |
| Nitrogen consumption | 200L/min |
| Expected compressed air consumption | 1000L/min |
| Compressed air pressure | 0.5~0.8Mpa |
| Capsule diameter | 20~60mm |
