Fully Automatic Face Recognition Swing Barrier Turnstile Security
Systems
Introduction:
The whole product frame adopts stainless steel laser cutting, CNC
bending forming, beautiful appearance, simple control by servo
control system, large speed range, high speed of servo motor,
stable torque characteristics, and servo motor itself with encoder
To form a high-precision, high-performance control system. The
system adopts a standard quick-swap electronic interface,
integrates a two-dimensional code scanner and a card reader, etc.,
and can conveniently integrate bar code, two-dimensional code, ID
card, IC card and other reading and writing devices on the device,
thereby It provides an orderly and civilized way for the entry and
exit personnel, and can prevent illegal personnel from entering and
leaving. At the same time, in order to meet the requirements of the
fire exit passage, a special fire button interface is provided in
the system, so that the gate can be automatically opened and the
personnel evacuated in an emergency.
Functions:
1. Equipped with standard card read window, can be connect with
multi card-readdevice
2. With function of break down self check and alarm,easy
maintenance and operation.
3. Swing turnstile can be connected with external button or remote
control. achieved one or bi-direction passing at will
4. Auto reset function: If the passenger does not pass in given
time, arms will lock automatically,delay time can be 3 s, 5 s, 10
s, 60 s..(given time can be set by operator).
5. Mechanical anti-trap:When people or objects hinder the arm
running,the system will automatically detect and stop the run,swing
arm strength of small, realize humanized protection.
6. Swing turnstile can realize a normally open or normally closed
function switched by external button or remote control.
7. Lighting indicator :High brightness passing indication.
8. Normally open function:the swing turnstile arm will auto opening
when power is off.the direction can be adjusted.
9. Sound and light alarm function, including illegal traffic,
following, anti-trap etc.
| Model | TCP/IP Handicapped 650mm Passing Swing Turnstiles |
| Brand | KOMAI / OEM |
| Size/Stick length | 1200*280*980MM |
| Arm length | 280 mm (norm) |
| Material | SUS 304 thickness(1.5mm) |
| Input Voltage | AC110-220±10%,50HZ60HZ |
| Moter's power | 24V |
| Failure-free operation | 5 million/time |
| Weight | 65kg |
| Traffic speed | 35 persons/min |
| Flap Opening/Closing Time | 1-2s |
| Operating humidity | ≤90% |
| Operating temperature | -15℃-60℃ |
| FWD DS | |
| Working environment | indoor and outdoor |
Features:
1. The system has anti-collision function. When a foreign object
hits the gate in an unauthorized state, the movement angle of the
gate reaches the value set by the menu (such as 2°), the controller
will activate the brake mechanism, prevent the gate from moving,
and start. Audible alarm. When the external force is further
increased, the brake controller will protect the gate from being
broken. After the external force is removed, the gate is
automatically reset and the system is normal;
2. With fault alarm prompt function;
3. Based on RS485 communication between the two drives, real-time
interactive information and data between each other. It is a
high-performance and high-reliability fieldbus. Its support for
distributed control or real-time control provides an effective
guarantee for communication between drives, ensuring the
synchronization and state of the gates.
4. The servo motor drive mode is full-closed control. The
high-stability encoder is used as the position loop input unit, and
the superior proportional-integral differential algorithm is used
to ensure accurate position, fast response, stable operation and no
jitter delay during the operation of the gate. And other phenomena;
the motor runs without squeaking, the operation is smooth and
unobstructed, the torque is suitable, and the service life is long;
5. Multiple anti-pinch protection function, when the gate swing
gate is blocked and the actual running current is greater than the
anti-pinch protection current, the physical anti-pinch protection
function will be triggered. In addition to the infrared anti-pinch
protection function, multiple protection functions greatly reduce
the occurrence of accidental injury;
6. With automatic reset function, if the pedestrian reads the valid
card, if the system does not pass within the specified time, the
system will automatically cancel the pedestrian access right;
7. Unified standard external electrical interface, which can be
connected with a variety of card readers, and can be remotely
controlled and managed through a management computer;
The entire system runs smoothly and with low noise
FAQ:
1. Can you install RFID card reader on the turnstile?
Yes,except the RFID card reader system,we also can install
fingerprint reader system,token system,esd system,etc.
2. How about the guarantee and after sale service?
We have 12 month quality guarantee, We own well-trained and
passional sales & after- sale services who can speak fluent English
language
3. How long is the leading time?
For standard item
10-50 sets:5 working days
50-100 sets:7-10 working days
200-500 sets:10-15 working days
For special item, or need custom design package or logo, need 3-10
working days longer
4. How about the payment terms?
TT,western union,L/C,our company already joined the trade
assurance,it will highly protect your order security.
5. How do you send the product to me,how long?
For sample,normaly send by air or express,about 3-5 days
For quantity purchase,normally by sea, it normally takes 7-60 days
depend on different countries.
6. Can you do OEM service?
We offer below OEM services:
1)We can make custom design turnstile,or you tell me your
requirements ,we can make a design for you.
2)Can print your logo on turnstiles, can customize the retail box
packing and other things.
7. How can we contact with you immediately?
We got several kinds of communicate ways, just hope to keep good
touch with you
