300 Pcs Per Minute 3 Colors High Speed Flexo Printing Machine For
Corrugated Carton
Printing department
Feed the upper and lower rollers
1.on the roll: diameter ¢ 71 mm seamless steel pipe, with three
paper feed ring.
2.the next roll: diameter ¢ 134.6mm seamless steel pipe, surface
grinding, hard chrome plated
3. feeding roller cross slider-type dial dial manually adjust the
adjustment range of 0 ~ 12 mm. Adjustment does not affect teeth
Wheel clearance, to ensure transmission accuracy.
steel anilox roller rubber roller set ink system
1.diameter of ¢ 176mm.
2.steel surface grinding, repression reticulate, hard chrome
plating.
3.alance correction, smooth operation.
4.mesh number is 180,200,220,250 lines / inch selection. Option
ceramic roller 300line/inch
5.with the feed system pneumatic automatic lifting device. (When
feed paper pr the anilox roller is lowered and touched with print
plate ,stop feed paper anilox roll is up and the plate is
separated)
6.Anilox roller with wedge-type clutch, even ink, easy to clean
ink.
7.rubber roller diameter ¢ 186 mm.option the doctor blade system
8.steel pipe surface wrapped with wear-resistant rubber, and do the
balance correction.
9.rubber in the special high grinding, ink transfer effect is good.
Quick clearance fine-tuning self-locking device to ensure uniform
ink. The amount of uniform ink system, the conversion effect is
good, to extend the life of rubber roller.
Printing department
steel anilox roller rubber roller set ink system
1.diameter of ¢ 176mm.
2.steel surface grinding, repression reticulate, hard chrome
plating.
3.alance correction, smooth operation.
4.mesh number is 180,200,220,250 lines / inch selection. Option
ceramic roller 300line/inch
5.with the feed system pneumatic automatic lifting device. (When
feed paper pr the anilox roller is lowered and touched with print
plate ,stop feed paper anilox roll is up and the plate is
separated)
6.Anilox roller with wedge-type clutch, even ink, easy to clean
ink.
7.rubber roller diameter ¢ 186 mm.option the doctor blade system
8.steel pipe surface wrapped with wear-resistant rubber, and do the
balance correction.
9.rubber in the special high grinding, ink transfer effect is good.
Quick clearance fine-tuning self-locking device to ensure uniform
ink. The amount of uniform ink system, the conversion effect is
good, to extend the life of rubber roller.
phase adjustment mechanism
1.planetary gear structure.
2.printing phase using computered plc control impurt the digital
.(Run, stop can be adjusted), manually adjust the horizontal
position, adjust the distance of 10 mm.
3.in the printing process after the printing plate automatically
reset the system.
ink circulation
1.Pneumatic diaphragm pump, ink stability, easy operation and
maintenance.
2.ink filter, filter impurities.
printing phase fixing device
1.cylinder brake mechanism.
2.When the machine to separate or adjust the phase, the brake
mechanism to limit the machine rotation, to maintain the original
gear position fixed point.
Die cutting part :
Tool roll (lower roll)
1.outside diameter ¢ 250mm (without cutter).
2.cast iron surface grinding, hard chrome plating, balance
correction, increase operational stability.
3.die fixed screw hole spacing, axial 100mm; radial 18 equal parts.
Applicable tool height 25.4mm.
4.Wood template thickness: 16mm (for three-layer paperboard) 13 mm
(for five-layer paperboard)
Pad roller (upper roll)
1.diameter of ¢ 332mm, aniv cover 350mm
2.quick change type pad, wear resistance, long life.
3.cast iron surface grinding, hard chrome plated.
4.balance correction, increase operational stability.
5.pad thickness of 9m. Width 250mm. Mechanical type transverse 40mm
swimming device. (Adjustable swimming speed)
Grinding mechanism
1.electric grinding pads, modified fast and efficient.
2.to improve the service life of the pad.
Machine date
Name of parameter | JGY-HS 900 |
Color Group | Everything can be quipped according to users’ needs |
Printing Paper | A,B,C,A/B,B/C and A/B/C Corrugated Cardboard(Maximum gap 11mm) |
Production Speed | 250 Pieces/min |
Economic Speed | 200 Pieces/min |
Max.Paper Sizes | 900x1800/2000/2200/2400/2600mm |
Min.Paper Sizes Positive knife Negative knife | 300x640mm 300x720mm |
Max.Printing Sizes | 900x1600/1800/2000/2200/2400mm |
Max.Die-cutting Size | 900x1700/1900/2100/2300/2500mm |
Standard Printing Plate Thicknes | 7.2mm |
Slot Width x Max.depth | 7mmx220mm 7mmx300mm 7mmx350mm (Number of blade and slot depth may be added) |
Min.Slot Space Positive knife Negative knife | 150*150*150*150mm 250*90*250*90mm |
Printing Roller Dia | 300mm |
