LED Digital 10KPA Medical Device Testing Equipment Flow Tester

Medical device flow tester

Product introduction:
The medical device flow tester is designed according to the relevant provisions of the national standard for medical devices, which is used to detect the flow and flow rate of infusion set, blood transfusion set, infusion needle, anesthesia bag, catheter, etc.
The medical device flow tester is a special equipment designed according to the relevant provisions in the national standard for medical devices. Configuration requirements: main engine + 6m / M standard gas pipe 6m 2.3 pressure output range: higher than local atmospheric pressure, 10KPA ~ 200KPa, display mode: LED digital display; pressure output value can be set arbitrarily, the calibration error is not more than ± 2.5% of the reading. Test duration: 5 seconds ~ 99.9 minutes, LED digital display, the error is not more than ± 1s. It is suitable for infusion set, blood transfusion set, infusion needle, catheter, anesthesia filter, etc.
When the test is conducted according to Appendix B of YY 0285.5, the flow rate of pipes with nominal outer diameter less than 1.0 mm shall be 80% - 125% of the value marked by the manufacturer; for pipes with nominal outer diameter greater than or equal to 1.0 mm, the flow rate shall be 90% - 115% of the value marked by the manufacturer
11 kg net weight
Overall dimension: 400 × 290 × 240 (mm)

Shanghai kerang technology co., ltd is located in Shanghai City, China, and was established in 2018.It is a company specializing in the field of automation technology: technology development, technology transfer, technical consultation and technical service; installation, design, commissioning and maintenance of automation equipment; and other high-tech enterprises. And have strong R & D capabilities in the field of test instrument industry. The testing equipment developed by the company is widely used in many industries such as electronics, home appliances, etc.

We have strong technical reserves and solid technical strength, especially in the field of environmental testing equipment or product online monitoring. The newly developed products are used in aerospace, aerospace, nuclear industry and other projects.

Looking forward to your inquiry and negotiation.