UVproof Single Mode G652D GYFXTY Optical Fiber Cord
FTTH FIBER TO THE HOME CABLING SYSTEM GYFXTY Fiber optic Cable PE
jacket
Description
Non-Armored Uni-Tube optical cable with fibers placed in loose
buffer tube.The cable core is protected with jelly to prevent water
intrusion and migration, and cover with a black polyethylene out
jacket. Two embedded FRP or metallic wire provide desire tension.
The cable consists of a central loose tube, filled with a synthetic
oil based jelly, non-nutritive to fungus, electrically
non-conductive, homogeneous and free from dirt and foreign matter,
containing up to 12 optical fibres.Two Fiber Reinforced Plastics
(FRP) elements are longitudinally applied parallel with the tube,
and an outer black PE sheath, UV resistant.
Features
1. Compact size, use universal cable clamp make installation
easily.
2. Uni-tube gel-filled construction for superior fiber protection.
3. Two embedded FRP member to provide high tensile and crush
resistance.
4. UV and waterproof design.
5. Designed for use with inexpensive attachment hardware.
6. Self-supporting no messenger needed.
7. Applied for Duct, Aerial FTTx, Access.
Application
GYFXTY:Designed for quick installation and ease in handling,
Flat-Span Drop cable serves as the last link for the FTTx networks
of today.
The design is Uni-Loose Tube containing up to 24 fibers.
Two embedded FRP member to provide the mechanical properties of the
cable.
The finished product, with its compact size, acts as a
self-supporting aerial solution for those last mile drops to the
customer's home or office.
Technical Data
Fiber count | 12 core |
Fiber type single Mode G652D |
Max. No of loose tube1 |
Fiber No. per tube | 12 |
Loose tube diameter | 2.0mm |
Outer sheath thickness | 1.5-1.8mm |
Strength member | 1.0FRP |
Outer sheath | Anti UV PE |
Cable OD mm | 6 |
Cable weight kg/km | 50 |
Operation temperature range | -40 d℃ to + 70 ℃ |
Installation temperature range | -40℃ to + 70 ℃ |
Transport and storage temperature range | -40 ℃ to + 70 ℃ |
Allowable Tensile Load(N) | Short term:1500,Long term:600 |
Crush resistance | 1000 N/10cm2200N/10CM |
Minimal installation bending radius | 20 x OD |
Minimal operation bending radius | 10 x OD |
Aerial Performance:
The cables are suitable for installation in “pipeline” systems,
aerial on walls and aerial on poles, with up to 50 meters
span and minimum 1% installation sag. The cables withstand the
additional loads generated by wind and ice in the following
environmental conditions:
(a) temperature –5°C, wind speed 100 km/h
(b) temperature –20°C , wind speed 50 km/h , ice radial thickness 8
mm
The use of proper fittings, as recommended by WANBAO, is adviceable
in order to achieve the mentioned performance.
