Vertical Grain Rice Seed Gypsum Belt Bucket Elevator Hoist Conveyor
1. Main Technical Parameters of Bucket Elevator:
| Main technical parameters |
| Machine type | TDTG | TDTG | TDTG | TDTG | TDTG | TDTG | TDTG | TDTG | TDTG |
| 26x15 | 40X19 | 40X23 | 61X29 | 70X33 | 80X47 | 80X51 | 100X47X2 | 110X51X2 |
| Conveying capacity(T/H) | 8~15 | 20~35 | 20~35 | 35~50 | 60~100 | 120~200 | 150~250 | 350~550 | 400~650 |
| Bucket | Speed(m/s) | 1~2 | 1.6~2.5 | 1.6~2.5 | 2.0~3.2 | 2.0~3.2 | 2.0~3.2 | 2.0~3.2 | 2.5~4 | 2.5~4 |
| Capacity(L) | 0.62 | 1.26 | 1.31 | 1.59 | 3.9 | 8.5 | 9.46 | 8.5X2 | 9.46X2 |
| Distance(MM) | 150~200 | 200 | 200 | 200 | 250 | 250 | 250 | 250 | 250 |
| Width(MM) | 150 | 190 | 235 | 285 | 337 | 475 | 519 | 475 | 519 |
| Bend width(MM) | 175 | 220 | 250 | 350 | 380 | 500 | 550 | 1000 | 1200 |
| Head drum diameter(MM) | 260 | 400 | 400 | 610 | 700 | 800 | 800 | 1000 | 1140 |
2. Descriptions of Mobile Belt Conveyor:
Belt bucket elevator adopts double - channel shell, high speed,
high lifting height, large conveying capacity, stable operation.
The maximum transport capacity of 650 tons / hour, the maximum
lifting height of up to 65 meters.
3. Applications of Bele Bucket Elevator:
Bucket elevators can handle a variety of materials, and therefore
are used in many different industries and applications, though
generally, they are not suited for wet, sticky materials, or
materials that are stringy or tend to mat or agglomerate. They are
frequently found in power plants, fertilizer plants, pulp & paper
mills, and steel production facilities. Some of the most common
materials for which bucket elevators are employed include:
1).Aggregates 2).Animal Feeds
3).Calcined Coke 4).Coal
5).Fertilizer 6).Fly Ash
7).Frac Sand 8).Minerals
9).Potash 10).Lime
4. Working Principles of Grain Seeds Hoist Conveyor:
When the motor is switched on, the head pulley is driven by
coupling or chain wheel and chain or reducer hollow shaft, the
power is transferred to the bucket chain, and the bucket mounted on
bucket belt in certain spacing does circulating motion along the
leg from the bottom up; materials enter the bucket in motion from
material inlet, and conveyed to the head section of the elevator
when filled, When the bucket belt turns around the head pulley,
materials are ejected from the bucket under the action of
centrifugal force and gravity. Since the head casing is deigned in
parabola, which makes materials discharged from material outlet
along the casing. There is adjustable baffle device equipped at the
material outlet, which can reduce the back flow of materials from
the falling pipe of elevator. And then the empty buckets come back
to the boot section of elevator along the rotation of chain and are
lifted after filling with materials including the dropping material
and discharge again. By such a repeated circle the materials in
bottom are lifted to a given height and then discharged, so as to
meet a requirement of vertical lifting.
