Pressure Sensitive Polyolefin Hot Melt Glue For Bed Mattress with
white color and strongest bonding
DESCRIPTION
| glue type | polyolefin hot melt glue |
| application | bed mattress, nonwoven product |
| performance | fast dry, strong tack |
TYPICAL PROPERTIES
Appearance : Light yellow transparent solid
Color (Gardner) : ≤ G3
Softening Point (R&B) : approx. 77 ℃
Viscosity (Brookfield) : @120 ℃ approx. 8,700 cps
OPERATING GUIDES
The material can be applied by all types of spray and slot
applicators. Suggested operation temperature is 130 –
160 0 C for both, depending on machines, substrates, and plant
conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation
of 21 CFR 175.105, “Adhesives”.
PACKAGE
1kg sausage wrapped with meltable film, 25kg/box.
Please consult the sales representative for special requirement.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months,
from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature
below 35 0 C and above 5 0 C.
Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination.
The material is applied hot. Appropriate personal protective
clothing and eye protection are strongly
recommended to prevent burns.
Adequate ventilation is suggested to remove any vapors or fumes
generated.
Rotate stocks and using the oldest stock first.
