PM50-R IP Decoder with USB control, ONVIF & H265/264 compatible,
1ch HDMI Outptut with 25 split, USB mouse for camera switch and ptz
control, Video over IP
In general
PM50-R IP Decoder is furnished with 1ch HDMI output and 2 USB port
for Mouse & keyboard control.
This Decoder is furnished with mouse and keyboard, it could work
individually without computer.
This Decoder could decode ip cameras or RTSP stream compatible with
ONVIF, H265/264 /MPEG4.
the All In One software configures and manage all Encoder &
Decoder, to send camera list & PTZ control to Decoder.
Its requirement to bandwidth is much lower than usual models in the
market.
The Solution could be multiple Encoder or Decoder, no limit on
quantity,every Decoder or Encoder has its IP, their communication
is over IP.
Features
All in one software configure Decoder over IP.
Every Decoder could work without computer, it could switch Video of
encoder, control PTZ by mouse.
Support 4K@ 30hz transmission
Support One To One, Many To One or Many To Many communication
Support HDMI 1.4b signal input and HDMI loop.
Support HDMI 2.0 output, maximum 4K output
Support Across Network segment transmission, no limit on different
locations. It could transmit together with Video signal in same
network.
Support Video super low delay.
Support to work with Hybrid matrix, IP Wall o IP matrix could work
with this Encoder without any integration.
Decoder support Video Zoom+ or - , it could switch during Video
resource of different resolution.
Support Code stream and adjustable Video quality.
Support USB mouse plug and play.
Support Hot key, it can switch to designated PC by one key.
Support RS485, RS422 sync. Transmission.
PM50-S server All in One software
Specifications
| Decoder |
| Video | 1ch HDMI 2.0 output |
| Audio | Optional, 1ch 3.5mm audio input, 1ch 3.5mm output |
| Decoding | H264, H265, Onvif compatible |
| Network | 1ch RJ45,10/100/1000Mbps self-adaptive |
| USB | 2ch USB-A port for Mouse and keyboard |
| RS485/422 | 1ch RS422 Full duplex, compatible with RS485 port, RJ45 |
| Resolution | Maximum 4K@30Hz input |
| Remote firmware update | Support |
| Power | DC12V,DC12V/2A adaptor included |
| Power consumption | ≤12W |
| Dimension | L:215.5mm * H:44.0mm *D:284.0mm ( without ear or other chassis) |
| Ear for chassis mount | Ear is optional for 19” rack chassis |
| Installation | Stand-alone or chassis available to choose |
| Working temperature | 0℃～55℃ |
| Humidity | 10%～90% |
Applicaitons:
This model is good choice for some applications whch request BNC
output, we have had experience in Metro.
