AAAC Conductor 16mm2 25mm2 4 Core Aerial Bundled Cable
Applications:
a. Max operating temperature :XLPE insulation 90°C,High-density PE
insulation 75°C,PVC insulation 70°C.
b. Installing temperature of cable should not be below -20°C.
c. Max short-circuit temperature,Not more than5 Sec:XLPE insulation
250°C,High-density PE insulation 150°C,PVC insulation 130°C.
d. Permissible Bending radius of cable:Should be not less than
20(d+D)±5%mm. Where:D is overall diameter of cable; d is diameter
of conductor.
Type and Name:
1. AAAC Conductor, All Aluminum Alloy Conductor:
All Aluminum-Alloy Conductors (AAAC) can be used in Medium, High
and Extra-High voltage transmission lines. AAAC offers better sag
performance due to the high strength-to-weight ratio provided by
the aluminum-alloy. In addition, AAAC provides a higher corrosion
resistance than ACSR conductors.
2. AAC All Aluminum Conductor Cable:
AAC conductors can be installed in air. It is recommended that the
installation instructions indicated by the Local Electric Code, or
any equivalent, be followed, so that the safeguarding of persons
and the integrity of the product will not be affected by
deficiencies in the installation.
Standards:
1. B-230 Aluminum Wire, 1350-H19 for Electrical Purposes.
2. B-231 Aluminum Conductors, Concentric-Lay-Stranded.
3. B-232 Aluminum Conductors, Concentric-Lay-Stranded, Coated Steel
Reinforced (ACSR).
4. B-399 Concentric-Lay_Stranded 6201-T81 Aluminum Alloy
Conductors.
5. B498 Zinc-Coated Steel Core Wire for Aluminum Conductors, Steel
Reinforced (ACSR).
6. Duplex Service Drop cable meets or exceeds all applicable
requirements of ANSI/ICEA S-76-474
| ABC cable |
| 16 mm 2 * 2C | ( AL7/1.70+PE O.D.7.10) + AL7/1.70 or + AL6/1.70+G1/1.70 |
| 16 mm 2 * 4C | 3*(AL7/1.70+PE O.D.7.10) + AL7/1.70 or + AL6/1.70+G1/1.70 |
| 25 mm 2 * 2C | ( AL7/2.12+PE O.D.8.90) + AL7/2.12 or + AL6/2.12+G1/2.12 |
| 25 mm 2 * 4C | 3*(AL7/2.12+PE O.D.8.90) + AL7/2.12 or + AL6/2.12+G1/2.12 |
| 35 mm 2 * 2C | ( AL7/2.50+PE O.D.10.0) + AL7/2.50 or + AL6/2.50+G1/2.50 |
| 35 mm 2 * 4C | 3*(AL7/2.50+PE O.D.10.0) + AL7/2.50 or + AL6/2.50+G1/2.50 |
| 50 mm 2 * 2C | ( AL19/1.78+PE O.D.11.7) + AL19/1.78 |
| 50 mm 2 * 4C | 3*(AL19/1.78+PE O.D.11.7) + AL19/1.78 |
| 70 mm 2 * 2C | ( AL19/2.12+PE O.D.13.5) + AL19/2.12 |
| 70 mm 2 * 4C | 3*(AL19/2.12+PE O.D.13.5) + AL19/2.12 |
| 95 mm 2 * 2C | ( AL19/2.50+PE O.D.15.8) + AL19/2.50 |
| 95 mm 2 * 4C | 3*(AL19/2.50+PE O.D.15.8) + AL19/2.50 |
Constructions:
Conductor: Solid or stranded copper,aluminum
Insulation: Cross-linked polyethylene( XLPE or PVC)
Circuit Identification: The insulation shall be red, black
Filler: Polypropylene lament with lapped binding tape
Inner Sheath: Polyvinyl chloride (Black)
Armor: Aluminum wire/steel wire armour
Core-covering: Binding tape
Outer Sheath: Polyvinyl chloride (Black)
Package: Wooden Drum Package or Iron-wooden drum
Technical Data:
| TECHNICAL PARAMETERS SHEET |
| No. | Description | Unit | Data |
| 1 | Manufacturer | | Huanghe Cable Group |
| 2 | Country of manufacturer | | China |
| 3 | Code Name | | Condor |
| 4 | Aluminum Area | mm2 | 402.84 |
| 4 | Steel Area | mm2 | 52.19 |
| 5 | Total Area | mm2 | 455.03 |
| 6 | Aluminum Stranding & Wire Diameter | mm | 54/3.08 |
| 6 | Steel Stranding & Wire Diameter | mm | 7/3.08 |
| 7 | Approximate Overall Diameter | mm | 27.72 |
| 8 | Approximate Weight | kg/km | 1520.7 |
| 9 | Breaking Load | KN | 125.4 |
| 10 | DC Resistance @ 20°C | Ohm/km | 0.07192 |
| 11 | Current Rating | A | 614 |
