Automatic Low E Glass Film Edge Grinding Machine For Deletion Of
Low-e Film
Insulating glass processing machine: The vertical low-e glass film
remover used to manufacture double-layer glass is used to quickly
remove the film on low-e glass. The deletion machine can delete
rectangular glass and special-shaped glass. It has 6 servo motors.
Main Features:
Bidirectional glass channel
Remove Double and Triple Silver Low-e Glass
Automatic glass size measurement
Automatic recognition of low emission surfaces
Adjustable edge removal
The head can rotate 360°. Safe and fully automatic device
PLC control system, touch screen interface
6 servo control system
Can recognize intelligent control system, batch processing
| Max glass size | 2500mm*4500mm |
| Min glass size | 350mm*500mm |
| Wheels width | 10mm, 12mm, 15mm |
| Deletion width | 10mm - 150mm |
| Glass thickness | 3-15mm |
RFQ :
1. What is the function of the film remover?
The main function is to remove the edge film of Low-e glass
2. Reasons to remove low E glass film
Prevents the film from oxidizing during synthesis of insulating
glass.
3. Which glass should be removed?
Offline Low-e glass
4. In addition to using the vertical film remover to remove film,
what other ways can you remove film?
Manual, horizontal edge grinder, bilateral edge grinder, 4-edge
edge grinder, cutting machine, etc.
5. What are the advantages of using a film separator? What are the
drawbacks? What are the advantages of using other methods? What are
the drawbacks?
Can be connected using our vertical film rdeletion machine, labor
saving, good film removal effect, good glass flatness, can be in
addition to large plate glass. The disadvantage is that it
increases the overall length of the line and covers a large area.
Manual film removal effect is low and slow. The other is the
removal of the film before strengthening. Since the heating times
of white glass and Low-e glass during tempering are not the same,
glass deformation occurs and the advantages do not require much
investment.
6. Is the glass before tempering of the dividing film good after
tempering of the dividing film? why?
After tempering, the film removal is good and the glass deformation
is small.
7. What brand of PLC, servo motor driver, frequency converter do
you use to remove the machine?
Currently Delta PLC Servo Motor and Drive, Inverter Delta and
Schneider
8. How many sections does the film removal machine have? What are
the dimensions of each segment? What is your role?
The film remover is divided into three sections. The first or third
section is 2.2 meters and is mainly for glass input/output and
glass storage. The central section is 5.3 meters and is mainly for
film removal.
9. Can the device distinguish the surface of low emissivity film?
The film layer can be detected automatically.
10. If I use film remover, do I have to enter the length and width
of the glass?
No, it will be detected automatically.
Company Introduce :
JINAN LIJIANG AUTOMATION EQUIPMENT CO.,LTD
Address: Block B 1307, Green Square, Huaiyin District, Jinan, China
Tell : 0086 0531-85960498 Fax : 0086 0531-87562846
Salesperson: Hermione (+86 18353163989 / +86 13001733235)
Email: sales01@lijiang-glass.com
Website : www.lijiang-glass.com /
www.insulatingglassproductionline.com
