Glass Edge Finishing machine suitable for the edge-finishing of the
raw glass for insulating glass
Edge finish machine LJKBM95
Main feature
- It is used to polish a single glass and keep the craftsman from
scratching from the edge of a sharp glass
- Adopt type "x" to polish up edge and down edge at the same time
- Easy operation, simple and flexible
Technical data
| Power supply | 380V 50Hz |
| Total power | 3kw |
| Dimension | 2000*1200*820mm |
Aluminum frame transfer machine LJSKJ02
Main feature
- Spacer frame transport
- Easy operating, simple and flexible
Technical data
| Power supply | 380V 50Hz |
| Total power | 0.18kw |
| Dimension | 2520*3012*3000mm |
Molecular sieve filling machine LJFGJ 03
Main feature
- Can effectively seal the desiccant,to keep dry
- Manual filling desiccant into spacer frame
- Recyclable
- Easy operating, simple and flexible
Technical data
| Power supply | 220V 50Hz |
| Total power | 1kw |
| Dimension | 2490*400*2200mm |
Cantilever crane LJXJ300
Technical data
| Max. load | 300kg (500kg is optional) |
| Rotated angle | 90° |
| Upright height | 3400mm or 3900mm |
| Rail length | 1000mm |
| Quantity of sucker | 2 or 4 |
| Air pressure | 0.5MPa-0.8MPa |
Company introduce:
JINAN LIJIANG AUTOMATION EQUIPMENT CO.,LTD
Address: Block B 1307, Green Square, Huaiyin District, Jinan, China
Tell : 0086 0531-85960498 Fax : 0086 0531-87562846
Salesperson: Hermione (+86 18353163989 / +86 13001733235)
Email: sales01@lijiang-glass.com
Website : www.lijiang-glass.com /
www.insulatingglassproductionline.com
a. Warranty: One year (the wearing parts and abrasive tools are not
in this range). Ideal working conditions can be guaranteed by
replacing the wearing parts, electrical parts and some other parts
under normal operation.
b. Lijiang has its own after-sales service system. It can be
divided into 3 situations.
① After the machine arrives at the customer's factory, Lijiang can
send engineers to the customer's factory for free for machine
installation, commissioning and personnel training. However, the
return air ticket and accommodation will be borne by the customer.
② During the warranty period (one year), if there is a problem with
the equipment, the customer requires Lijiang engineers to repair it
at the factory. The round-trip ticket is the responsibility of the
customer, and there is no maintenance fee and spare parts fee
(except for wearing parts).
③During the warranty period (one year), if there is a problem with
the equipment, the customer requires Lijiang City to send an
engineer to the factory for maintenance. Customers should be
responsible for round-trip air tickets and accommodation, and also
need to pay a service and maintenance fee of US$150 per day for
Lijiang City. All parts must be paid before delivery.
After sales service:
