Floating Bridge Float Pontoon Bridge
Floating boat docks Specifications:
Dimension: 500mm×500mm×400mm(L*W*H)
Weight: 7.0Kgs/ pc ± 0.3Kgs/ pc
Floating Capacity: 350Kgs/ M2
Raw Material: HDPE with UV
Preference Temperature: -60°C/+80°C Color available: orange, blue,
gray, black
Load Capacity:
each one square meter is made up of four pontoons, top load is
325kgs.
Draft without load: 2.5-3cm;
Draft with load of 150kgs: 15-20cm(safe);
Draft with load of 300kgs:35-40cm(load limit)
Anti Wind Wave:
1.The wave on water surface between 2-class and 3-class belongs to
safe applicable range.
2.The wave on water surface between 3-class and 6-class can be
applicable; however,the safety protection must be reinforced.
3.The wave on water surface between 6-class and 9-class is the
restricted applicable range (it is suggested that the shipping
shall not be parked and the visitors shall not be in or out).
Attention: to avoid shaking of the dock, the area of internal
lake’s dock is not less than 30 square meter; the area of stage is
not less than 100 square meter.
Anchoring:
1.If water is less than 3m in depth, steel piles are to be put in
proper place and then connected by wheels, which can prevent the
floating dock from moving laterally but can automatically rise and
fall in line with water level.
2.If water is over 3m in depth, anchoring can be used by sinking
the anchorage block pulled by steel cables to the water bottom.
Guarantee:
warranty on our floats are 3 years, that is within three years, if
there is any damage caused by the product in normal condition, we
will replace the floats for you.
Packing and shipping
| Payment terms | T/T,L/C,D/P,D/A ,WESTERUNION, |
| Trade Terms | EXW,FOB CNF CFR,CIF |
| Delivery Time | 10days after the deposit |
| Loading Port | NINGBO,SHANGHAI or as your requirements |
| Package | Standard package |
| OEM | Available |
Floating Bridge Float Pontoon Bridge
