Large swimming pool constant temperature equipment pool heating
constant temperature air source heat pump swimming pool unit
Three in one pool heat pump, 6 functions:
1. Dehumidity
|
2. Fresh air
|
3. Constant temperature
|
4. Space heating & cooling
|
5. Initial temperature rise
|
6. Bathing
|
Parameters and Installation
| Heating capacity: 84 KW | Noise: ≤75 Db(a) |
| Input power: 19.1 KW | Working environment temperature: (-25 ° C) - 45 ° C |
| Current: 35A | Heat exchanger: anti-corrosion heat exchanger |
| Maximum outlet temperature: 38 °C | Interface size: (flange) 63 DN |
| Voltage / frequency: 380V / 50V / Hz | Environment dry bulb temperature 20 ℃, wet bulb temperature 15 ℃,
into the cold water temperature 15 ℃, |
| Water flow: 22000L/h L/H | water temperature 38 ℃ measured |
Product discrition:
Heat pump used the heat from the air -20℃ below the cold coal
recovery after compressed into a high temperature and high pressure
refrigerant, it needs to be heated by heat transfer of water or
other medium, make the heat efficiency of 400-500%.
A. Payment service
1. T/T, 30% deposit, 70% balance before shipment.
B. Technical service
1. We calculate the capacity and recommend the best models.
2. We supply you the professional refrigeration technical support
and electronic technical support for your installation, debugging
and operation.
3. We supply the spare parts and technical support in and after the
warranty time.
4. We supply the training course to your workers at our factory if
you need, we can also offer site training.
5. We welcome you to be our partner.
C. After-sales service
1. Technical support for your installation, operation and
maintenance.
2. Standard warranty time: One years’warranty for heat pumps
You can also pay for extended warranty or we can renegotiate the
longer warranty period.
3. Spare parts and technical support at most economic prices after
the warranty.
FAQ
Q1. Can I have a sample order for Heat pump or Water tank?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A: Sample needs 3-10 days, mass production time depend on the
products' quantity.
Q3.Do you offer guarantee for the products?
A: Yes, 14 month since the heat pump left our factory.
Certificate we have got :
| 1> ISO 9001, ISO 14000 |
| 2> Our company has been inspected and certificate by EMC |
| 3> CE And EN14511, EN 14825-ERP for heat pump exported to Europe |
| 4> Energy label for all heat pump models sold to over sea market |
| 5> Testing laboratory calibrated by CNAS |
Our leading products
Air to water heat pump, Water chiller, Inverter heat pump, High
water temperature heat pump.
Mono block house heating heat pump, Split heat pump, Super low
noise heat pump.
Heat pump dryer, Ground source heat pump, water to water heat pump,
swimming pool heat pump.
