G455/30/100 Paint 25x3 Serrated Bar Grating

Hot Dipped Galvanized Serrated Flat/Stainless Steel Grates/Floor Bar Grids

Steel gratings consist of a series of bearing bars cross jointed by welding at various intervals with cross bars (twisted square bars, square bars, round bars, flat bars etc.), to form a kind of steel products with square lattices among them. Their main applications are drain covers, steelwork platform panels, and steel stair treads.

Bearing Bar (Load Bar) Specifications (mm)

The specification of plain type and serrated type bearing bar is 20 x 3 to 100 x 10;the specification of I-section type is 25 x 5 x 3, 32 x 5 x 3, 38 x 5 x 3, 40 x 5 x 3, 50 x 5 x 3, 50 x 7 x 4, 55 x 7 x 4, 60 x 7 x 4, 65 x 7 x 4, 70 x 7 x 4, 75 x 7 x 4, etc.

Bearing Bar Pitch (center to center)

12.5, 15,25, 30, 30.16, 32.5, 34, 40, 41.25, 45, 50, 60, 60.32, 80, 100 mm etc, also be according to client's requirement and 30, 40, 60mm are recommended,

America standard is available :1'' x 3/16'', 1 1/4'' x 3/16'', 1-1/2'' x 3/16'', 1'' x 1/4'', 1-1/4'' x 1/4'', 1 1/2'' x 1/4''(19-w-4),(19-w-2) and so on.

3) Cross Bar Pitch (center to center)

38, 50, 76, 100, 101.6mm etc, also be according to client's requirement and 50, 100mm are recommended,

America standard is available.

Specification