Wall Mounted CO EX O2 PH3 2000ppm Fixed Gas Detector
Introduction
K-G60 fixed gas detector is a new type of gas detector developed in
combination with the company's many years of experience in gas
detection. It is used to detect the concentration of flammable
gases or other toxic and harmful gases in the air.
Details
K-G60 fixed gas detector is a new type of gas detector developed
and produced by the company's many years of experience in gas
detection. It is used to detect the concentration of flammable
gases or other toxic and harmful gases in the air. When the
concentration reaches or exceeds the preset alarm value. At the
same time, the controller will give an audible and visual alarm,
and promptly take measures to prevent the explosion and poisoning
accidents, thus ensuring the safety of life and property.
The product has the advantages of stable signal, high precision,
rapid response, long life, short polarization time, etc. It adopts
industrial grade sensor, the instrument casing adopts
explosion-proof explosion-proof structure design, 4-20mA standard
signal or directly enters DOS system, which can be widely used. In
the metallurgical, petroleum, chemical, municipal and other
industries, it is at the leading level of similar products in
China.
The outer casing is made of die-cast aluminum shell with flameproof
structure. The groove of the upper cover is designed to lock the
casing. The front of the sensor is designed as a downward structure
to ensure good contact between the sensor and the gas. The inlet is
made of explosion-proof waterproof joint.
Specification
| NO. | gas | Range | Detection Accuracy | 90% Response Time | Minimun Readout | Alarm Set Point Low/High |
| 1 | PH3 | 0-2000ppm | ±5%(F.S) | ≦25s | 0.01ppm | 0.3/5ppm |
| 2 | O2 | 0-30%vol | ±5% | ≦15s | 0.10% | 19.5%/23.0% |
| 3 | EX | 0-100%LEL | ±5%(F.S) | ≦5s | 1%LEL | 25.0%/50.0%LEL |
| 4 | CO | 0-1000ppm | ±5%(F.S) | ≦25s | 1ppm | 50ppm/100ppm |
| 5 | CO2 | 0-5000ppm | ±5%(F.S) | ≦25s | 1ppm | 1000ppm/2000ppm |
| 6 | H2S | 0-100ppm | ±5%(F.S) | ≦30s | 1ppm | 10ppm/20ppm |
| 7 | NO2 | 0-20ppm | ±5%(F.S) | ≦25s | 0.1ppm | 3ppm/10ppm |
| 8 | NO | 0-250ppm | ±5%(F.S) | ≦60s | 1ppm | 25ppm/50ppm |
| 9 | SO2 | 0-100ppm | ±5%(F.S) | ≦30s | 0.1ppm | 2ppm/10pppm |
| 10 | CL2 | 0-20ppm | ±5%(F.S) | ≦30s | 0.1ppm | 1ppm/10ppm |
| 11 | NH3 | 0-100ppm | ±5%(F.S) | ≦50s | 1ppm | 25ppm/50ppm |
| 12 | H2 | 0-1000ppm | ±5%(F.S) | ≦60s | 1ppm | 50ppm/10ppm |
| 13 | HCN | 0-50ppm | ±5%(F.S) | ≦200s | 0.1ppm | 10ppm/20ppm |
| 14 | HCL | 0-20ppm | ±5%(F.S) | ≦60s | 0.1ppm | 5ppm/10ppm |
| 15 | CH4 | 0-100%LEL | ±5%(F.S) | ≦5s | 1%LEL | 25.0%/50.0%LEL |
Details
