Stainless steel load cells for off center loads, suitable for
example to build CE-M approved scales with a single load cell with
maximum dimensions of 800x800 mm.
CAPACITIES (kg): 500, 1000.
OIML R60. C3 precision class.
17-4 PH stainless steel. IP68 protection.
MAIN FEATURES
C3 PRECISION CLASS
OFF CENTER LOAD COMPENSATED
MADE IN 17-4 PH STAINLESS STEEL
IP68 PROTECTION
MAX. CAPACITIES FROM 500 TO 1000 kg
FOR PLATFORMS WITH DIMENSIONS UP TO 800 X 800 mm
SHIELDED CONNECTION CABLE
TEST CERTIFICATE AVAILABLE UPON REQUEST
TECHNICAL FEATURES
Minimum load cell verification interval: Vmin = EMax / 10.000
Maximum number of verification intervals: nLC = 3000
Full Scale Output: 2mV/V +/- 10%
Temperature effect on zero: 0,01% FS/10K
Temperature effect on full scale output: 0,001% FS/10K
Compensated Temperature Range: -10°C/+40°C
Operating Temperature Range: -10°C/+50°C
Creep at nominal load in 30 minutes: ± 0,01% F.S.
Maximum tolerated excitation voltage: 15 VDC
Input Resistance: 380 ± 15 Ohm
Output Resistance: 350 ± 10 Ohm
Insulation Resistance (100V) >2000 MOhm
Safe Overload: 300% F.S.
Ultimate Overload: 300% F.S.
Nominal displacement: < 0.5 mm
6-wire shielded cable, 3m long, 5mm diameter
