Features:
1. Light-weight, thin thickness offer faster warm-ups and quicker
response.
2. Very flexible offer thermal contact with the Part for maximum
heating efficiency.
3. Offered in a virtually unlimited range of shapes, sizes and
wattages.
4. Their flat etched foil elements cover more area and transfer
heat more efficiently than wire wound designs.
5. On request, temperature distribute in the surface of the heater.
6. Small thermal lag, precision temperature control and fast
response.
7. polyimide film insulation is dimensionally stable,
self-extinguishing, and highly resistant to oils, chemicals,
fungus, solvents and radiation.
8. Thermostats and other sensors may be integ rated into the design
for accurate control and temperature tracing.
9. PSA is available as an option on heater rated at 1W/cm2 and
2W/cm2. The heater can be mechanically clamped or epoxy mounted by
the user.
10. Very safety, realizable and long life.
Specification
1. Maximum resisting temperature of inner tube: 250(PFA)
2. Inner resisting pressure: 10 KG f/cm2(150℃)
3. Maximum resisting temp. of outer coat:
105℃
4. Inner maintenance temp.:140℃(40W/m)
5. Lowest installation temp.: -9℃
6. Max contact temp.: 60℃
7. Heat transfer coefficient of insulation layer: 2.6W/m2·℃
8. Working voltage, power: 220V, 40W/m2
Installation instructions
Our product is available to cut according to specific needs. About
0.5m should be obligated after cutting.
Carefully separate the plate and inner tube. The cutting part
should be cone shape and well taped to avoid damaging. Flaring type
joint is used to connect inner tube and equipment.
Connecting box is recommended to connect the power and heater. All
the accessories can be provided by Hotlong.
Our Services
For one year guarantee period and the wroking life of design is
50000 hours to 100000 hours.
The specifications of heater can be custom design.
We devote to solve problems and provide solutions for you on
heating field.
