Fiber Protection Sleeves 40mm Ribbon 12F Fiber Splice sleeves
Brief Introduction:
Clear Optic fiber cable Splice Protection Sleeves is a specially
designed crosslinked Clear Heat Shrinkable tubing, with Clear
fusion tubing liner, providing SS304 strength member and protection
to fiber optical splices.
Geehe's fiber splice sleeves widely for optical fiber connection protection components.
Fiber Splice Heat Shrink Characteristics:
- Heat Shrink Splice Protectors.
- Heat Shrinkable Fiber Optic Splice Protectors.
- Consist of cross-linked polyolefin, Hot fusion tubing, and
Stainless Reinforcing
- Steel Rod which keeps optic transmission properties of optical
fiber and enhances the protection to optical fiber splices.
- Easily operating to the optical fiber during installation without
damaging and clear sleeve make it easy to detect splice before
shrinkage.
- Sealing structure makes the splice free from the influence of
temperature and humidity in a special environment.
- Shrinkable sleeve is applied to the optical fiber closure to fix
and protect the optical fiber when splicing.
- Outer diameter after recovery: OD3.0 mm +/- 0,1mm
- Hole diameter before recovery: OD1,3 mm
Specification & Characteristics:
| Project | Test Method | Typical Data |
| The Tensile Strength | ASTM d 2671 | 18Mp |
| Tensile Rate | ASTM d 2671 | 700% |
| Density | ISO R1183D | 0.94g/cm3 |
| Compressive Strength | IEC 243 | 25KV/mm |
| Volume Resistivity | IEC 243 | 1015Ω |
| The Dielectric Constant | IEC 243 | 2.5 |
| The Longitudinal Shrinkage Rate | ASTM d 2671 | ≤5% |
| The Rate Of Partial Wall | ASTM d 2671 | 10% |
| Size | Routine | 15,25,35,40,43,45,50,60 |
| Unconventional | Micro 15mm, 8 core 24mm, 12 core 40mm |
| Operating Temperature | (-40 -+85℃) |
| Initial Shrinkage Temperature | 120℃ |
Fiber Fusion Splice Heat Shrink Application:
* The sealing structure provides good performance after melting, in
the environment with temperature and humidity.
* Special for fusion splices, preventing it from breaking when
being handled.
* The transparent color allows you to see the color of the fiber
after fusion.
New Types Of Fiber Heat-shrink Tube Specification Technology:
| Item | Description | Sleeving | Outer tube (Heat-shrinkable) |
| Diameter (Before shrink) | Diameter (After shrink) | Length | Inner Diameter | Outside diameter | Length |
| 1 | Fiber Protection Sleeves _11mm_φ1.9_Without Strength Member | 1.9±0.1 | 1.25±0.1 | 11±0.1 | 1.4±0.1 | 1.9±0.1 | 11±0.1 |
| 2 | Fiber Protection Sleeves _15mm_φ1_with Strength Member | 1.8±0.1 | 1.4±0.1 | 15±0.1 | 1.5±0.1 | 1.8±0.1 | 15±0.1 |
| 3 | Fiber Protection Sleeves _20mm_φ3_Without Strength Member | 3.9±0.1 | 2.5±0.1 | 20±0.1 | 3.4±0.1 | 3.9±0.1 | 20±0.1 |
| 4 | Fiber Protection Sleeves_20mm_φ4_Without Strength member | 4.4±0.1 | 3.0±0.1 | 20±0.1 | 4.0±0.1 | 4.4±0.1 | 20±0.1 |
