IC693ALG221 GE Analog Current Input Module
⇒ Click here for good price IC693ALG221
| Brand/Manufacturer | GE/USA |
| Part Number | IC693ALG221 |
| Alternate Part Number | IC693ALG221 |
| Description | MOTOR SERVO |
| Dimennsions | 3.6x13x13.5cm |
| Weight | 0.35kg |
Contact Us
Email: miya@mvme.cn (CLICK)
QQ: 2851195450
Tel: 86-18020776792(CLICK)
Skype:miyazheng520(CLICK)
Product Details
IC693ALG221 is an Analog Current Input Module with four input
channels for the Series 90-30 Programmable Logic Controller. This
controller’s channels are each capable of converting an analog
input signal into a digital signal as needed for the application.
Two input ranges are available with a default of 4 to 20 mA with
scaled user data so 4 mA corresponds to a count of zero and 20 mA
to 32000. Each 1000 count represents 0.5 mA. If a jumper is added
to the I/O terminal board, the input range is adjusted to 0 to 20
mA with scaled user data scale corresponding to a count of 32000
with each 800 count equal to 0.5 mA. This module is equipped with
two range jumpers: one for channels 1-2 and one for channels 3-4.
The IC693ALG221 input module allows conversion speed of one half
milliseconds for each of the channels with an update rate of two
milliseconds for any of the provided channels. Resolution speed on
a converted signal is 12 bits over either chosen range. Percent AI
user data registers in 16 bit 2’s complement format. If the current
source is reversed into the input, the module will output a data
word that parallels to the low end of the range.
Input protection for the IC693ALG221 is sufficient to work with
reduced performance with up to 200 V in common mode settings. This
module also allows electrical isolation of external noise. All
field connections require a good grade twisted, shielded
instrumentation cable connected to the COM or GND. An LED indicator
monitors power supply operation. The main power source specific to
the IC693ALG221 is +24 VDC supplied PLC power routed through an
inverter for the module. IC693ALG221 uses power from the +5 VDC
output to drive isolation circuitry.
Our advantages
1) TRICONEX(3008,3625,3805E.3721,3700A 4351B...)
2) BENTLY NEVADA(3500/42M ,3500/22M,3500/95.3500/05...)
3) HIMA(F3330,F3236 ,F6217,F7126,F8621A....)
4) FOXBORO(FBM203,FBM204,FBM217,FMB231...)
5) Allan-Bradley (1756,1785,1771,1746,1769..)
6) ABB (DSQC .....)
7) GE(IC693,IC697,IC695,IS200,DS200)
8) BACHMANN(CM202,DI232,MPC240,NT255,AIO288...)
9) ICS (T8403,T8431...)
More Products
| GE | DS200FCGDH1B DS200FCGDH1BBA | GE | IC200GBI001-GJ |
| GE | IC200PBI001 | GE | 469-P5-HI-A20 |
| GE | IS200EXHSG3AEB | GE | 369-HI-0-0-0-0 |
| GE | 369-HI-R-M-0-0-0-E | GE | SR 469 469-P5-HI-A20 |
| GE | IC200CHS022L | GE | IS200TBAIH1C |
| GE | IC200MDL650K | GE | IS200TDBSH2A IS200TDBSH2AAA |
| GE | IC200MDL750J | GE | IC693APU301R |
| GE | VMIC VMIPMC-5565 | GE | IC693PWR321Y |
| GE | IS220UCSAH1A | GE | IC752SPL014 |
