IC693MDL340 GE 120 volt, 0.5 Amp AC Output Module
⇒ Click here for good price IC693MDL340
| Brand/Manufacturer | GE/USA |
| Part Number | IC693MDL340 |
| Alternate Part Number | IC693MDL340 |
| Description | MOTOR SERVO |
| Dimennsions | 13.6x13x13.5cm |
| Weight | 0.4kg |
Contact Us
Email: miya@mvme.cn (CLICK)
QQ: 2851195450
Tel: 86-18020776792(CLICK)
Skype:miyazheng520(CLICK)
Product Details
The IC693MDL340 is a 120 volt, 0.5 Amp AC Output Module of the
Series 90-30 manufactured by GE Fanuc. It provides 16 output points
in two isolated groups with eight points in each. Each of these
groups has a separate common associated with it (the two commons
are not integrated inside the IC693MDL340), allowing each group to
be used with independent AC supply phases. Alternatively, it is
also possible to power both commons with the same supply. Each
group has a 3-ampere fuse for protection, as well as an RC snubber
for each output to guard them against transient electrical noise
from the power line. This module also has an output voltage range
of 85 to 132 volts AC, 50/60 Hz, and an output current of 0.5
amperes maximum per point. The maximum per group is 3 amps.
IC693MDL340 provides a high-degree of inrush current, making its
outputs advisable for controlling a great variety of loads, both
inductive and incandescent. The user must provide an AC Power
supply to operate the loads connected to outputs. This module can
only function on an AC power source. IC693MDL340 has LED signaling
lights at the top, designed to represent the ON/OFF status for each
point. Additionally, it also has two horizontal lines with another
eight green LEDs each, and one final LED at the center between the
two lines. The eight LEDs at the top, which are identified as A1 to
8, indicate output status. The red “F” LED turns on to signal a
blown fuse. Unless there is a load connected to the blown fuse, the
LED will not function.
IC693MDL340 features an insert that separates its hinged door’s
external and internal surface. Once this door is closed, circuit
wiring information is shown the inside surface of the module, and
circuit identification information can be found on the outside
surface. The external left edge of the insert is colored red to
indicate a high-voltage module. IC693MDL340 module can be installed
in any I/O slot of a 5 or 10-slot baseplate in a Series 90-30 PLC
system. IC693MDL340 has a response time of 1 ms maximum when ON and
a maximum off response time of ½ cycle. It has a power consumption
of 315 mA (when all outputs are on) from 5 voltages bus on
backplane.
Our advantages
1) TRICONEX(3008,3625,3805E.3721,3700A 4351B...)
2) BENTLY NEVADA(3500/42M ,3500/22M,3500/95.3500/05...)
3) HIMA(F3330,F3236 ,F6217,F7126,F8621A....)
4) FOXBORO(FBM203,FBM204,FBM217,FMB231...)
5) Allan-Bradley (1756,1785,1771,1746,1769..)
6) ABB (DSQC .....)
7) GE(IC693,IC697,IC695,IS200,DS200)
8) BACHMANN(CM202,DI232,MPC240,NT255,AIO288...)
9) ICS (T8403,T8431...)
More Products
| GE | IS220PDIOH1A | GE | DS200IMCPG1C |
| GE | IC200MDL244 | GE | DS200IMCPG1BBA |
| GE | IC695ALG600 | GE | DS200LRPAG1AGF |
| GE | IC200ALG430 | GE | HE693RTD601Q |
| GE | IC200CHS022J | GE | IC693PWR321T |
| GE | MIWII1000E00HI00 | GE | IS200EGDMH1A IS200EGDMH1AAB |
| GE | MIVII1000E00HI00 | GE | IS200TRPGH1BDE |
| GE | IC693CPU323 | GE | IS220PRTDH1A |
| GE | DS200TCCAG1BAA | GE | IC693BEM340 |
| GE | DS200STBAG1A DS200STBAG1ACB | GE | IC200ERM001 |
