OM3 50/125 Orange Jacket Fiber Optic Patch Cord FC To ST Duplex
Multi Mode Fiber
1. Basic Introduction:
Our fiber optic cables are available with various combinations of
LC, SC, ST, FC, MTP/MPO, and MTRJ connectors. OM1 & OM2 Stock
cables in 1 to 15-meter lengths. We also offer OM3 cables up to 30
meters and OM4 up to 100 meters. Singlemode and Multimode 1 to 50
Meter lengths.
FC to ST Patchcord, 50/125um Multimode, Duplex, 3mm Cable, 3M,
which is used to connect fiber optic equipment to equipment or
patch panel to equipment.
2. FC To ST Patch Cord Benefit & Features:
- Low insertion loss & back reflection
- 100% tested on optical performance
- Standard color is Yellow, Orange, Aqua, or Purple, other colors
available upon request
- PC, UPC, APC connectors type available
- High concentricity 2.5mm ceramic ferrule for FC, ST, SC and 1.25mm
ceramic ferrule for LC and MU
- Telcordia style boots
- Available in G652D, G657A, OM1, OM2, OM3, and OM4
- Available in 0.9mm, 1.6mm, 2.0mm, 3.0mm size
3. Fiber Optic Patch Cord Applications:
- Optical Fiber Communications, Video, LAN, CATV Systems
- Optical Network Equipment, Optical Test Equipments
- Module Pigtails, Multi-media, Premise
- Active device termination installations
- Data Center
- Optic Amplifiers
4. Specification&Technology Parameter
| Parameters | Value |
| Connector Type | LC/UPC,LC/UPC |
| Center Wavelength(nm) | 1310 or 1550 |
| Max.Insertion Loss(dB) | 0.3 |
| Min.Extinction Ratio(dB) | 23 |
| Min.Return Loss(UPC) (dB) | 55 |
| Min.Return Loss(APC) (dB) | 65 |
| Key Orientation | Slow Axis |
| Axis Alignment(deg) | ±3 |
| Operating Temperature(℃) | -20~+70 |
| Storage Temperature(℃) | -40~+85 |
| FIber Type | PM Panda Fiber |
* For Device with connector.IL is 0.3dB higher,RL is 5dB lower,ER
is 2dB lower.
* The default connector key is aligned to the slow axis.
5. FC Connector Specification& Technology Parameter:
| Parameter | Unit | Index |
| End-Face Type | | PC | UPC | APC |
| IL | dB | SM: ≤0.3；MM ≤0.1 |
| Repeatability | dB | ≤0.1 |
| interchangeability | dB | ≤0.2 |
| RL | SM | dB | ≥50 | ≥55 | ≥65 |
| MM | dB | ≥36(Without APC connector) |
| Mating Times | | ＞1000 |
| Operating Temperature | ℃ | -40~ +80 |
6. FC Patch Cord Ordering Information:
| OFC | -X | -XX | -XX | -XX | -X | -X |
| S: Simplex
D: Duplex | FA:FC/APC FC:FC/UPC FP:FC/PC | FA:FC/APC FC:FC/UPC FP:FC/PC | 09:0.9mm 20:2.0mm 30:3.0mm | 0:G652D 1:G657A 2:50/125 3:62.5/125 4:others | 0.5:0.5m
1.0:1.5m
10:10.0m |
| Fiber Mode | Connector Type | Connector Type | Cable Diameter | Flange Type | Fiber Length |
* EX: OFC-S-FA-FC-09-1-0.5
7.How to choose Fiber patch cords?
1)Fiber Cable Mode: Single Mode or Multimode
The mode of fiber patch cables indicates how light beams travel
within the fiber. There are two fiber cable modes: single mode and
multimode.
2)Number of Fiber Strands: Simplex or Duplex
According to the number of fiber strands, there are simplex and
duplex fiber patch cord. As shown in Figure 2, simplex fiber patch
cord contains one single strand of fiber with one simplex connector
on each end. It can be linked with a pair of BiDi transceiver
modules featuring with one port. Whereas duplex fiber patch cord
consists of two strands of glass or plastic with one duplex
connector (or considered as two simplex connectors). It is often
linked with common transceivers or dual fiber BiDi transceivers.
3)Choose the Right Cable Jacket Type (PVC/LSZH/OFNP/Armored)
Usually, there are three cable jacket types: Polyvinyl Chloride
(PVC), Low Smoke Zero Halogen (LSZH) and Optical Fiber
Nonconductive Plenum (OFNP). You can see there features in figure
below and choose the right one for your network.
4)Jacket Type: PVC or LSZH
PVC and LSZH are used to describe the common jacket material of
fiber patch cord. Fiber patch cables covered with PVC jacket are
flexible at normal installation temperatures. Compared with PVC
patch cords, LSZH patch cords are more rigid and less flexible but
they contain the flame retardant compound that doesn’t emit toxic
fumes if it burns. PVC fiber optic patch cord is usually used for
indoor applications such as horizontal runs from the wiring center.
While LSZH cable is used in unventilated areas exposed to public,
such as subways and tunnels and also used for rooms that are not
easy to get out quickly.
Connector Type: LC, SC, ST or Others
8. Geehe Factory Service
