printing roll

(plate roll)

Ø 【1】diameter of ¢ 468 mm (with diameter of ¢ 480mm)

Ø high-quality steel surface grinding, axial reference

Ø scale, hard chrome plating.

Ø to do the balance correction, smooth operation, to

Ø adapt to high-speed operation.

• 【4】ratchet fixed scroll plate, with hanging plate ditch, to
• adapt to the rapid version of the installation convenient and
• quick.
• 【5】full version of hanging slot, for 10 mm hanging version
• of the article.

Ø 【6】loading and unloading printing plate, foot switch

Ø electric control is reversing.

• 【7】printing roller axial manual traverse, the maximum
• movement of 10mm.

Printing

press roll

Ø 【1】diameter of ¢ 155 mm.

Ø the use of high-quality seamless steel pipe surface grinding, dynamic balance correction, smooth operation, hard chrome plating

Ø 【3】printing pressure roller cross slider-type dial to

Ø manually adjust the adjustment range of 0 to 12 mm.

Ø Adjustment does not affect Gear clearance to ensure

Ø transmission accuracy.

Feed the

upper

and lower

rollers

Ø 【1】on the roll: diameter ¢ 86 mm seamless steel pipe,

Ø with three paper feed ring.

Ø 【2】 the next roll: diameter ¢ 155 mm seamless steel pipe,

Ø surface grinding, hard chrome plated

Ø 【3】feeding roller cross slider-type dial dial manually adjust

Ø the adjustment range of 0 ~ 12 mm. Adjustment does not

Ø affect teeth Wheel clearance, to ensure transmission accuracy.

steel anilox

roller rubber

roller set ink

system

Ø 【1】diameter of ¢ 213.7 mm.

Ø 【2】steel surface grinding, repression reticulate, hard chrome

Ø plating.

Ø 【3】 balance correction, smooth operation.

Ø 【4】mesh number is 180,200,220,250 lines / inch selection.

Ø Option ceramic roller 300-500line/inch

Ø 【5】with the feed system pneumatic automatic lifting device.

Ø (When feed paper the anilox roller is lowered and touched with

Ø print plate ,stop feed paper anilox roll is up and the plate is

Ø separated)

Ø 【6】Anilox roller with wedge-type clutch, even ink, easy to

Ø clean ink.

Ø 【7】rubber roller diameter ¢ 186 mm.option the doctor blade

Ø system

Ø 【8】steel pipe surface wrapped with wear-resistant rubber, and

Ø do the balance correction.

Ø 【9】rubber in the special high grinding, ink transfer effect is

Ø good. Quick clearance fine-tuning self-locking device to ensure

Ø uniform ink. The amount of uniform ink system, the conversion

Ø effect is good, to extend the life of rubber roller.

phase adjustment mechanism

Ø 【1】planetary gear structure.

Ø printing phase using computered plc control impurt the digital .(Run, stop can be adjusted), manually adjust the horizontal position, adjust the distance of 10 mm.

Ø 【2】in the printing process after the printing plate automatic

Ø reset the system.

ink circulation

Ø 【1】Pneumatic diaphragm pump, ink stability, easy operation

Ø and maintenance.

• 【2】ink filter, filter impurities.

Printing

phase

fixing device

• 【1】 cylinder brake mechanism.
• 【2】 When the machine to separate or adjust the phase, the
• brake mechanism To limit the machine rotation, to maintain the
• original gear position fixed point.