Machine main feature: | 【1】 electric control machine from the alarm bell, continuous
ringing warning, to ensure the safety of workers. 【2】 drive shaft with friction clutch, to avoid misuse and damage to
the machine. 【3】 pneumatic interlock device. 【4】 The host motor starts the protection device. (The machine is
not locked, the host can not start running)
|
leading edge roller type feeding system
| 【1】 suction auxiliary feeding paper fan 7.5KW, according to the
different bending conditions of cardboard, air volume adjustment,To
ensure smooth paper supply. Use the brush to remove the cardboard
surface Dust, scraps of paper and other debris, improve the
printing quality. [2] slotted with a chain control switch, control emergency stop
paper. 【3】The paper lift and down adopt the air cylinder ,the action
quickly, effort.the use of Shandong "Komori" front edge roller feed
system, simple [3] operation, high precision. The amount of extension can be
adjusted, raw Strong adaptability. Speed transmission more stable,
suitable for warping, thin cardboard transmission, the effect is obvious. 【5】side baffle, rear box position by the screw electric adjustment;
front baffle upper and lower gap position manually synchronized
adjustment. 【6】skip feeding device (according to the need to choose continued
or sheet feeding). 【7】PLC control, man-machine interface, menu storage, printing plate correction, printing speed, quantity, time and the Department
operation
|
Feed roller
| 【1】 up roller use the soft rubber shaft ,so when feed the board ensure the not broken the board Diameter 132mm, wearing rubber shaft ,make the balance correct ,keep the paper feed steay and accurate. 【2】The lower feed roller with embossing roller diameter ¢ 155 mm, seamless steel pipe, embossed hard chrome plating. 【3】feeding roller cross slider-type dial dial manually adjust the adjustment range of 0 ~ 12 mm. Adjustment does not affect the gear gap, to ensure transmission accuracy. 【4】 hand-type quick clearance fine-tuning self-locking device.
|
Automatic zero device
| 【1】The paper feed section, the printing section, and the slotted
part are automatically reset to zero. [2] General carton use automatic zero device, try to print two can be adjusted to the correct position to reduce cardboard waste.
|
