Hauni Protos 70 Filter Cutter To Cut Cigarette Rod With Filters
Assembled
Filter Knife is a component of cigarette making machines to slice
filter rod after being connected to cigarette rod.
Stainless Steel
Different types of stainless steel include the elements carbon
(from 0.03% to greater than 1.00%), nitrogen, aluminium, silicon,
sulfur, titanium, nickel, copper, selenium, niobium, and
molybdenum.pecific types of stainless steel are often designated by
a three-digit number, e.g., 304 stainless.
Stainless steel:276 is a family of iron-based alloys that includes
approximately 11% chromium, a composition that stops the iron from
rusting, while providing heat-resistant properties.
Yield Strength
Yield strength is low (200 to 300 MPa), which limits its use for
structural and load-bearing components.
They are weldable by all processes; the most frequently used
process is electric arc welding. They are essentially non-magnetic
and maintain their ductility at cryogenic temperatures.
Their elongation is high, which allows for deformation in
fabrication processes (such as deep drawing of kitchen sinks).
Heat Treatment Of Martensitic Stainless Steels
Austenitizing, where the steel is heated to a temperature in the
range 980–1,050 °C (1,800–1,920 °F), depending on grade. The
resulting austenite has a face-centered cubic crystal structure.
Tempering. Martensite would be heated to around 500 °C (932 °F),
held at such high temperature, then air-cooled. Higher tempering
temperatures decrease yield strength and ultimate tensile strength
but increase the elongation and impact resistance.
Quenching. The austenite is transformed into martensite, a hard
body-centered tetragonal crystal structure. The quenched martensite
is too hard and brittle for most applications. Some residual
austenite may remain.
