Vertical Handle Toggle Clamp Used In Shoes Manufacturing Tooling
Industry GH-10648
Manual Quick Release Flanged Base Vertical Hold Down Toggle Clamp
GH-10648
Quick release, big holding capacity
Application:
Welding, machining, checking fixture, assembly fixture,
woodholding, metal holding, workholding clamps
Shoemaking Industry
It refers to the PU sole produced by PU foaming mode, and manual
toggle clamps are used as a fixture in PU foaming molds for sole
manufacture. Main application models: 10648,10448.
Note: Manual toggle clamps can be used for all products or parts
that are produced with PU foaming methods and have the
characteristics of continuous mass production.
Note: PU has been widely used in military, sports, construction and
daily necessities. Manual toggle clamps can be used for products
produced with PU foaming methods
Automobile Industry
1. Production of various automobile steering wheels:
1) used as fixtures for welding jigs. Main application models:
201,201-A,201-B,101-B.
2) used as end caps for foaming molds. Main application models:
304,305 series.
2. Production of various automobile interior accessories:
1) Dashboards, etc. (using PP, ABS materials); used as clamping
fixtures for "casting molds"; Main application models: 431,40341.
2) Dashboards, etc. (using PU materials); used as clamping fixtures
for "foaming molds"; and
Main application models: 40341,10448,20448,702-D etc.
3) Inspection of interior accessories is used as positioning and
locking fixtures for testing jigs;
Main application models: 101-D,12130,12135,302-F etc.
4) Lining (with leather, wool cloth materials) is used as fixing
fixtures for fixing upper and lower molds on the press.
Main application models: 40370,40380.
3. The rivets and welds on the chassis of small cars such as
minibuses, jeeps and sedans are used as positioning and locking
fixtures for riveting and welding jigs. Main application models:
702-C,702-D,702-K,303-E,304-H etc.
4. In the production of partially refitted auto bodies, the manual
toggle clamp is used in the assembly and welding of auto bodies.
Main application models: F clamps and Toggle Pliers.
5. Manual toggle clamps are used for local spot welding during
assembly in small and medium sized automobile plants.
Main application models: Toggle Pliers.
6. Production of luxurious minibus and bus bodies:
1) Body keel welding is used as fixtures for welding jigs. Main
application models: 10648,702-D,10247,12265,11412 etc.
2) For welding of the outer metal plate of the car body, manual
toggle clamps are used as fixtures.
Main application models: F clamps and Toggle Pliers.
3) For the adhesion of super-luxury bus and minibus interior
accessories, manual toggle clamps are used for adhesion and
fixation between interior accessories and auto bodies. Main
application models: F clamps.
Note: Manual toggle clamps can be used for all products or parts
that are similar to the above categories regarding the
manufacturing materials and production methods and have the
characteristics of continuous mass production.
Motorcycle Industry
1. Welding of car frames is used as positioning bolts and fixtures
for welding molds.
Main application models:
12265,11412,11421,101-B,12205,10247,22175,25382,36020,304-E,304-H,303-E,36060,702-C,30509
etc.
2. Steering column: welding of front and rear forks and guard
frames is used as positioning bolts and fixtures for welding jigs.
Main application models: 11421,11412,22175,36020,302-F,303-E etc.
3. The production of engine cylinder heads and cylinder blocks is
used as fixtures for drilling machines.
Main application models: 25383,25382,12265-A,12132-A etc.
4. Carburetors, mufflers and wire harnesses are all used in the
same way as in the "automobile industry."
Note: Manual toggle clamps can be used for all products or parts
that are similar to the above three points regarding the
manufacture of materials and production methods and have the
characteristics of continuous mass production.
Toggle Action:
The theoretical maximum holding or clamping force of a toggle
action device is achieved when the three pivot points are in a
straight line. To make allowance for external forces due to
vibration and changing load conditions in industrial use, the
proper amount of over travel of the center pivot point has been
carefully calculated to yield maximum clamping pressure ,while
achieving positive locking position.
.100% brand new and high quality.
.Ideal for quickly holding down sheet metal or circuit boards, for
machine operation, welding, mould, electronic equipment assembly,
etc field.
.During clamping, the lever is controlled to prevent impact on
functioning due to side thrust.
.Side Mount hold-down toggle clamp, U bar, flanged base. With
rubber cap spindle.
.Plastic cover handle for easy, safe and comfortable operation.
| Weight (g) | Holding Capacity (kg) | Bar Opens (º) | Handle Opens (º) | Spindle Supplied |
| 1310 | 450 | 67.5 | 60 | GH-SA-125017 |
| Brand | JOINTECH |
| Model | GH-10648 |
| Bar Type | Solid Bar |
| Base Type | Flanged |
| Handle Type | Straight |
| Clamping Type | Vertical |
| Operation Type | Hold Down Quick Clamping |
| Standard / Non | Standard |
| Holding Force (LBS) | 900 |
| Spindle Standard | mm/inch |
| Material | Metal |
| Surface Treatment | Zinc Plated |
| Finish | Silver |
| Design | OEM & ODM |
| Price Term | Ex-works; FOB Shenzhen; CIF; CFR; DDU; DDP; DA; DP; |
| Payment Term | T/T; L/C; Western Union; Visa; MoneyGram; Paypal; |
| Sample Request | F.O.C. / $2USD |
| Stock Status: (PCS) | 500 |
| Package Method | PE Bag; Inner and Master Carton; Each Master Carton is Less than
50lbs; |
| Pallet | Wooden / Fumigation / Plywood / Plastic / Aluminum Alloy; |
| Shipment Method | Sea / Train / Truck / UPS / DHL / FEDEX / TNT / EMS |
