Description
The Olet is also called the pipe holder, which is a kind of
high-pressure forged pipe fitting. This kind of fitting connects
the main pipe and the branch pipe. Generally, the main pipe is
large, but the branch pipe is small. When installing the Olet, it
is necessary to open a hole on the main pipe, and then weld the
branch pipe with the main pipe. The branch pipe can be connected
with the main pipe through butt welding, socket welding, thread and
other ways. In this way, it is not necessary to use tee pipe
fittings for connecting branches in large pipes, which can reduce
costs and facilitate construction.Olet is also called saddle and
saddle type pipe joint. It is mainly used for reinforcing pipe
fittings of branch connection instead of branch connection types
such as reducing tee, reinforcing plate and reinforcing pipe
section.
Advantage
1, The Olet has the outstanding advantages of safety and
reliability, cost reduction, simple construction, improvement of
medium flow channel, series standardization, and convenient design
and selection.
2, Olet is widely used in high pressure, high temperature, large
diameter and thick wall pipelines, which replaces the traditional
branch pipe connection method.
3, Stainless steel threaded Olet is a kind of branch pipe, which is
a kind of reinforcement pipe used in branch pipe connection in
recent years.
4, The threaded Olet has thread inside the pipe fitting, which is a
kind of high-pressure pipe connecting fitting formed by molding and
forging blank of round steel or steel ingot, and then machining and
forming by lathe.
Technical data sheet
Metal T Pipe Threaded Olet 304l Stainless Steel Pipe Fittings data
sheet below:
Nominal diameter of main pipe | Nominal diameter of branch pipe | Pressure rating |
L | D1/min | D2/rnin | E | d3 | J/min |
DN | NPS | DN | NPS | 3000 | 6000 | 3000 | 6000 | 3000 | 6000 | 3000 | 6000 | 3000 | 6000 |
8^900 | 1/4~36 | 6 | 1/8 | 19 | — | 27 | 一 | 22 | — | 15.9 | — | 6.1 | 一 | 6.4 |
10^900 | 3/8~36 | 8 | 1/4 | 19 | 一 | 27 | 一 | 22 | 一 | 15.9 | 一 | 8.5 | 一 | 8.1 |
15^900 | 1/2~36 | 10 | 3/8 | 21 | — | 30 | — | 25 | — | 19.1 | — | 11.8 | — | 9.1 |
20^900 | 3/4~36 | 15 | 1/2 | 25 | 32 | 38 | 45 | 33 | 42 | 23.8 | 19.1 | 15 | 11 | 10.9 |
25^900 | 1~36 | 20 | 3/4 | 27 | 37 | 47 | 52 | 39 | 48 | 30.2 | 25.4 | 20.2 | 14.8 | 12.7 |
32^900 | 5/4~36 | 25 | 1 | 33 | 40 | 56 | 63 | 48 | 58 | 36.5 | 33.3 | 25.9 | 19.9 | 14.7 |
40^900 | 3/2~36 | 32 | 1. 1/4 | 33 | 41 | 66 | 72 | 58 | 67 | 44.5 | 38.1 | 34.3 | 28.7 | 17 |
50^900 | 2~36 | 40 | 1. 1/2 | 35 | 43 | 75 | 83 | 64 | 77 | 50.8 | 49.2 | 40.1 | 33.2 | 17.8 |
65^900 | 5/2~36 | 50 | 2 | 38 | 52 | 90 | 104 | 77 | 93 | 65.1 | 69.9 | 51.7 | 42.1 | 19 |
80^900 | 3~36 | 65 | 2. 1/2 | 46 | — | 105 | — | 94 | — | 76.2 | — | 61.2 | — | 23.6 |
100^900 | 4~36 | 80 | 3 | 51 | — | 124 | — | 114 | — | 93.7 | — | 76.4 | — | 25.9 |
125^900 | 5~36 | 100 | 4 | 57 | 一 | 154 | 一 | 140 | 一 | 120.7 | 一 | 100.7 | 一 | 27.7 |
Characteristic
1, The Olet and saddle are used for reinforcement when the main
pipe is connected with the branch pipe. The main pipe is usually
used to connect the pipe below 2 ".
2, Pipe hoop is the connection between pipe and pipe, which can be
of the same pipe diameter or of different specifications.
3, As the pipe fitting connecting the pipe, the pipe hoop has
single socket and double socket; the Olet is Dn40 and below, mainly
in the form of socket welding and threaded connection.
4, The Olet also has threaded branch pipe, socket welding branch
pipe and butt welding branch pipe. Both the branch pipe and the
main pipe are welded, but the connection mode is different from the
branch pipe.
Application
1, There are two forms of reinforcement, the main pipe
reinforcement and the branch pipe reinforcement.
2, Stainless steel threaded Olet is the branch pipe reinforcement.
3, Compared with the thickness of the original pipe, the thickness
of the branch pipe has been increased, so as to achieve the
reinforcement.
4, The key to the use of stainless steel threaded Olet is to see
the requirements and design selection of each company, which is
independent of pressure and thickness.
5, In most cases, it is used to connect reducer. Equal diameter
pipes are rarely used, and the physical processing is also
relatively unsightly.
6, In general, the large-diameter Olet (more than 1 / 2 of the main
pipe) is connected by standard tee.
7, The diameter difference between the main pipe and the branch
pipe is large. If there is no tee, the branch pipe is used.
8, The outer diameter of main pipe and branch pipe shall be
provided for the procurement of threaded Olet, and the thickness of
branch pipe and branch pipe shall be provided if necessary.
Package
a. Plastic bubble bag package b.Wove bag package c.Pallet d.
Customized
Delivery time
Our Metal T Pipe Threaded Olet 304l Stainless Steel Pipe Fittings
factory have high ability for production, the delivery time is
45days for small quantity, or if you are hurry for that, we can
arrange and meet your shipping date
