Best Price Electric Fixed 5 Ton Column Slewing Swing Jib Crane
Design Manufacture
Product description
BZ type column cantilever crane is a cost-saving comprehensive
processing system. In some cases, this processing equipment is
usually the most economical solution.
This applies to storage yards, loading ramps or buildings where
other equipment cannot be installed due to structural restrictions.
BZ type column cantilever crane (maximum weight 1000kg)
Slewing cranes are characterized by high load capacity and
abduction relative to their own weight.
The light weight allows the cantilever to move easily, and the use
of hollow section rails as crane beams can provide very low moving
force.
BZ type column cantilever crane (up to 2000 kg)
Lightweight design and low headroom boom make this column slewing
boom crane suitable for general-purpose applications up to 2000 kg
in the medium load range.
BZ type column cantilever crane can also adopt low headroom design
The lower headroom size leads to a standard design with a 290 mm
increase in lifting height.
Whether it is for low-altitude space applications, modernization
measures or changes in building use, our "short" units are the
perfect solution in many situations.
Product advantages
1. Stable base: fixed with multiple chemical expansion screws, not
easy to rust, increase the force area, and ensure safety.
The bearing surface varies with tonnage.
2. Rotation angle: The rotation angle can be 360 degrees to meet
the needs of different space environments.
3. Smooth operation, low noise: The machine runs smoothly, with low
noise, flexible operation, and convenient installation and use.
4. Energy-saving, energy-saving, time-saving and labor-saving:
small floor space, convenient operation and maintenance.
It is an energy-saving material lifting equipment.
Use maintenance techniques
1. The operator shall strictly abide by the crane operating
regulations and shall not overload it.
2. The terminal baffle is not allowed to be used as a normal
parking method.
3. The chain or steel cable of the heavy object must be strong
enough and fastened firmly.
4. Lifting and moving of heavy objects should be carried out in a
vertical state.
It is prohibited to use electric hoist to drag or forcibly lift
buried heavy objects.
5. It is strictly forbidden to stand on the top to lift heavy
objects, and to walk on the bottom.
6. After work or rest, do not hang heavy objects in the air.
Technical parameters
| Model | BZ0.5 | BZ1 | BZ2 | BZ3 | BZ5 |
| Lifting capacity | T | 0.5 | 1 | 2 | 3 | 5 |
| Max. Lifting height | M | 3 | 3 | 3 | 4 | 4 |
| Max. Horizontal throw | M | 2.6 | 3-4 | 2.9-3.9 | 3.8 | 3.7 |
| Max. Radius of gyration | M | 3.6 | 4-5 | 4-5 | 5 | 5 |
| Max. Rotation moment | T/M | 3 | 6 | 12 | 18 | 27 |
| Angle of revolution | Degree | 360 |
| Lifting speed | Normal | m/min | 8(4) |
| Slow | m/min | 0.8(0.4) |
| Traveling speed | m/min | 20 |
| Angle of revolution speed | m/min | 1 | 0.75 | 0.7 | 0.9 | 0.6 |
Packaging
