Hot Dipped Galvanized Barbed Wire Single And Double Strand Barbed
Wire Security Fence
Description
1.The barbed wire is a kind of safety fence, which can enclose the
site in several parallel lines to protect the inside from external
intrusion. It has thorns on it to scare off the enemy or animals.
It has a roll shape with different materials and wire diameters. It
can be stretched out during installation, and then fixed with posts
or wooden piles.
Hot dip galvanized barbed wire is a product anticorrosion is quite
good, on the amount of galvanized zinc layer can be divided into
three types:-,
Highway barbed wire isolation gate also have called it barbed wire
fence, actually is the barbed wire.
Product has hot dip galvanized and PVC plastic coated PE
anticorrosive two kinds.
Specifications have wire diameter 2.6 2.8 mm, steel wire strands
wire, barbed wire, 2.2 mm steel wire strand and barbed wire is 1.7
mm weight is 25 kg - almost all volume.Sting from the aspects of 8
cm 10 cm, 12 cm three to 10 cm of has a very wide range of
use.Because it is used as protection on both sides of highway, so
for the quality requirement is high, good product will have better
protection, good product can achieve the standard of acceptance.
Specifications
Material: high quality low-carbon steel wire Q195 or Q235
Product classification: according to twist method classification:
single strand (single wire) twist, double strand (double wire)
twist, twist barbed rope.
(1) Single strand barbed wire: Wire diameter: 2.5 (main wire)
2.8-3.0mm (wire) Barb distance: 75-80mm
Coil diameter:,90,100 60 mm
(2) Traditional barbed wire: wire diameter: 1.6-2.8mm Pricker
distance: 75,80,100,120,150mm Coil weight: 20-25kg
(3) Twist barbed wire: Wire diameter: strand less than 2.5mm Pitch:
75,80,100,120,150mm roll weight :20-25kg
| Barbed Wire Specification |
| Type | Wire Gauge (SWG)
| Barb Distance (cm) | Barb Length (cm) |
Electric Galvanized Barbed Wire; Hot-dip zinc plating barbed wire | 10# x 12# | 7.5-15 | 1.5-6 |
| 12# x 12# |
| 12# x 14# |
| 14# x 14# |
| 14# x 16# |
| 16# x 16# |
| 16# x 18# |
PVC coated barbed wire; PE barbed wire | before coating | after coating | 7.5-15 | 1.5-6 |
| 1.0mm-3.5mm | 1.4mm-4mm |
| BWG11#-20# | BWG8#-17# |
| SWG11#-20# | SWG8#-17# |
PVC/PE coating thickness: 0.4mm-0.6mm Different colors or length are available at customers request. Weight of packing in coil: 16kg/coil, 25kg/coil, 50kg/coil as
standard. |
Application
Use of barbed wire: used in factory area, private villa, building
first floor, construction site, bank, prison, banknote printing
factory, military aircraft, bungalow, low wall, etc.
1: Barbed wire installation requires necessary stretching. This is
not a special pen that needs to be stretched, but the necessary
stretching is still necessary, because the barbed wire is entangled
in bundles when delivered to the user. After the outermost side is
unfolded, it will rebound due to the shrinkage of the metal wire.
This requires us to use mechanical appliances to perform the
necessary stretching to achieve a straight effect, so that the
installation of the barbed wire is not only beautiful and
beautiful, but also achieves a higher utilization rate.
2: The problem of fixing the barbed wire to the column is also
quite prominent. Many users buy cement poles by themselves but
don’t know if the barbed wire is fixed to it, or even more so, they
are directly wound around the cement pole to achieve fixation. The
purpose of the barbed wire manufacturer is actually to use iron
wire to tie the two together to achieve the purpose. However, it is
recommended that users purchase special barbed cord posts from the
barbed cord factory because there are hooks on them for fixing, so
they are relatively strong.
