AMS 5528 5529 ASTM A693 Stainless Steel 17-7PH 631 Sheet, Plate and
Strip
17-7 PH is a precipitation hardening semi-austenitic stainless
steel.
It is able to develop a very high strength due to the strengthening
of aluminium particles.
It is usually found in strip or wire form for spring applications.
| C | Si | Mn | P | S | Cr | Ni | Al |
| 0.09 | 1.00 | 1.00 | 0.040 | 0.030 | 16.00~18.00 | 6.50~7.75 | 0.75~1.50 |
SPECIFICATIONS
AMS 5528 Sheet, Strip and Plate
AMS 5529 Sheet and Strip–Cold Rolled
MIL-S-25043 Plate, Sheet and Strip
ASTM A 693 Plate, Sheet and Strip
(Listed as Grade 631-UNS S17700)
This grade combines the following characteristics:
- Good corrosion resistance better than 17-4 PH close to that of 304
- Very high strength up to 1700 MPa minimum UTS in EN 10151 or 1655
MPa minimum in ASTM A693
- Excellent fatigue strength
- Low distortion in heat treatment
- Weldable with matching consumables
17-7PH provides a combination of very high strength and moderate
corrosion resistance.
Its metallurgy is complex involving several stages of processing to
develop the necessary microstructure.
The highest level of strength is achieved by cold working to
produce martensite followed by an ageing treatment at about 480°C.
This restricts the use of the grade to thin sheet and wire
products.
Other heat treatment conditions are also available to produce
softer and more ductile material.
Applications which illustrate these features include:
Springs, Belleville washers, aerospace, orthodontic wire, strain
gauge, load cell, pressure transducer.
For Details, please Contact
WUXI GUANGLU Special Steel Co., Ltd.
Stainless martensitic • precipitation hardening steel • stainless
ferritic — Our answer to your needs
Tel: +86 510 81812873
Email: export@guanglusteel.com
