PVC coated overlay with LOCO magnetic stripes for magnetic card
production
1.PVC coated overlay with LOCO magnetic stripes for magnetic card
production- Introduction
HICO magnetic stripe coated PVC overlay MCO-MS-LOCO is applied with
standard magnetic stripe. It applies the high-quality magnetic
stripe made by LUCKY China. It can be directly laminated with the
printing sheets in the card laminator before punched into standard
magnetic card. It features high adhesion, no color change and
deformation with long aging life after the process of lamination.
2.PVC coated overlay with LOCO magnetic stripes for magnetic card
production- Technical Parameters:
1). Size: in sheet, A4, A3 or as per customer requirements
2). Coated overlay thickness range in mm: 0.04,0.05,0.06,0.08,0.10
3).Magnetic stripe feature: LOCO 300oe, standard width 12.7mm,
black color, Peelable transfer model, Brand: LUCKY
4). Size tolerance: +/-0.5 mm in length and width, +/-5% in
thickness.
5).Package method: 100/200 sheets per bag or as per customer
requirements.
6). Storage condition: Sealed, moisture-proof, room temperature
under 40℃, Keep it horizontally, avoid heavy pressing and direct
sunlight.
| 1 | Magnetic stripe | LOCO, standard width 12.7mm, black color, Peelable transfer model. |
| 2 | Size tolerance | +/-0.5 mm in length and width, +/-5% in thickness. |
| 3 | Overlay thickness | 0.04,0.05,0.06,0.08,0.10mm |
| 4 | Package method | 100/200 sheets per bag or as per customer requirements |
3.PVC coated overlay with LOCO magnetic stripes for magnetic card
production- Application
Thickness of overlay: 40-100 Micron
Size: Sheet size or Roll size
Classify: HI_CO 2750OE, LO_CO 300OE
Overlay Type: Coated Overlay, Uncoated Overlay
Magnetic stripe: Lucky or customized.
Technical note: In manufacturing process, it can be directly
laminated with PVC printing sheet, simplify the fabrication
process, save time, adhesive strength is high.
In manufacturing process, Magnetic Stripe PVC Film can be directly
laminated with PVC printing sheet, simplify the fabrication process
to save time.
Steps to make cards:
1).Put printing core and two overlays together, then put into the
laminator.
(The laminating temperature and time is determined as per the
instruction of the machine). Please be noticed that all glue sides
of both PVC sheets and overlays are put inward.
2).Lamination lasts 10-15 minutes (6-8Mpa 125-140℃).
3).Cutting.
4.PVC coated overlay with LOCO magnetic stripes for magnetic card
production-Packing
