Smart Card Material - PVC Overlay Film Reel or Sheet High Adhesion for HP Indigo Sheets Use
1. Smart Card Material - PVC Overlay Film Reel or Sheet High
Adhesion - Introduciton
Brief Introduction:
PVC Coated Overlay is suitable for laminating with conventional ink
and UV ink. It could reach excellent peel strength as using Water
Based Laminating Varnish . It provides superior aging resistance
performance to other similar products, no color change and
deformation after lamination. Laserable Coated Overlay is also
offered.
PVC Coated Overlay MCO-W model is suitable for laminating with most PVC sheets
printed by various printers. It features high adhesion, no color
change and deformation.
It is applicable to almost all sheets printed by various ink. It
features excellent peeling strength and long aging time.
Technical Parameters:
| Item | Parameters |
| Vicat (℃) | 72±2 ℃ |
| Shrinkage (%) | ≤10% |
| Tensile Strength (MPa) | MD | ≥40 |
| TD | ≥35 |
| Roughness (μm) | Ra | 0.5~1.8 |
| Rz | 3~9 |
| Thickness (mm) | 0.04~0.1
|
2. Smart Card Material - PVC Overlay Film Reel or Sheet High
Adhesion - Parameters
Technical Parameters:
| Item | Parameters |
| Vicat softening point | 72±2 ℃ |
| Heating Shrinkage ratio | ≤10 % |
| Tensile Strength | ≥40 MPa |
| Normal thickness in mm | 0.04,0.05,0.06,0.08,0.10 |
| Peel Strength (90°, 300mm/min) | ≥6.0 N/cm |
| Aging time (65℃ temp./95% humidity ) | ＞200 hours |
| Suitable ink | offset and silk screen printing UV ink, Pigment and dye ink for
inkjet printing as well as digital printing ink |
Parameters:
1). Size: in reel or sheet, A4, A3 or as per customer requirements
2). Normal thickness: 0.04,0.05,0.06,0.08,0.10mm
3). Color: transparent with one-side glue coating.
4). Package method: by reel or 500 sheets per bag/4-8 bags per
paper carton, or as per customer requirements. All the cartons are
firmly piled up and fixed on the solid plywood pallet.
5). Storage condition: Sealed, moisture-proof, room temperature
under 40℃, Keep it horizontally, avoid heavy pressing and direct
sunlight.
3. Smart Card Material - PVC Overlay Film Reel or Sheet High
Adhesion - Application
Characteristics:
● Suitable for conventional ink and UV ink, excellent peel
strength even with pearl ,gold ,silver and dark color inks.
● Keep the fluorescent anti-forgery mark clearly.
● Non-Sticky and easy for magnetic stripe tape-laying.
● Abrasion resistant , prolong the life of cards.
● Environment friendly, no solvent or gas discharged.
◆Product Category and Laminating Condition:
| Product Category | MCO-W |
| Application | ID Card,Social Security Card,Bank Card,etc | Bank Card,Shopping Card,etc | Membership Card,Commercial Card,etc |
| Suggested Laminating Condition | Laminating Unit | Heat Laminating | Cool Laminating | Heat Laminating | Cool Laminating | Heat Laminating | Cool Laminating |
| Temp | 130~150℃ | ≤25℃ | 130~150℃ | ≤25℃ | 135~155℃ | ≤25℃ |
| Time | 25min | 15 min | 25min | 15 min | 25min | 15 min |
| Pressure | ≥5MPa | ≥5MPa | ≥5MPa | ≥5MPa | ≥5MPa | ≥5MPa |
4. Smart Card Material - PVC Overlay Film Reel or Sheet High
Adhesion - Packing
Packing:
Outside:Carton Inside:PE bag
Storage:
Keep package sealed and moisture-proof , room temperature under
40℃.
Stacking height should not exceed one meter.
Keep horizontally, avoid oppress heavily and direct sun light.
Shelf life: Two years.
