1. Vertical mold opening, vertical injection, suitable for insert
molding
2. Nitrided steel screw, material tube, high torque hydraulic motor
drive, multi-stage injection pressure, good plasticizing
performance.
3. Direct pressure mother-mold lock cylinder design, rapid mold
clamping, low-pressure safety mold clamping, automatic mold
closing, multiple pressure control, high safety and improved mold
life.
4. Electrical protection device, no mistakes, maintenance operator
safety.
5. Automatic fault display, maintenance is quick and easy.
6. Electronic control and hydraulic use brand-name parts, quiet,
precise and durable.
7. Multi-stage temperature control, multi-stage injection pressure,
rate of fire, back pressure stepless adjustment, suitable for
molding of precision plastic parts.
8. Optional servo energy-saving motor.
9. This machine offers a wide range of programmable functions
including automatic inclusion, extraction and fully-automatic
production.
10 Two column and four column (option)
| Model | VL-150 |
| INJECTION UNIT | UNIT | A | B |
| Screw Diameter | mm | 22 | 25 |
| Injection Pressure | kgf/cm2 | 1715 | 1098 |
| Injection Volume(Theoratical) | cm3 | 38 | 49 |
| Injection Weight | g | 34 | 44 |
| oz | 1.2 | 1.6 |
| Injection Rate | cm3/sec | 20 | 30 |
| Screw Stroke | mm | 100 |
| Temperature Section | - | 3 |
| Hopper Capacity | Liter | 15 |
| CLAMPING UNIT | | |
| Clamping Force | tons | 15 |
| Platen Size | mm | 430*290 |
| Space between Tie Bars | mm | 320*180 |
| Min. Mould Height | mm | 80/140 |
| Opening Stroke | mm | 180 |
| Max. Open Daylight | mm | 260/320 |
| Ejector Force | tons | 1.7 |
| Ejector Stroke | mm | 55 |
| OTHERS | | |
| Max.hydraulic pressure | kg/cm2 | 140 |
| Tank Volume | Liter | 80 |
| Pump Motor Power | kw | 4(4) |
| Heater Power | kw | 2 |
| Total Power | kw | 6 |
| Machine Weight | tons | 0.75 |
| Machine Dimension | m | 1.8*0.9*2.4 |
