Electric Mobile Phone Drop Tester Electronic Products Small Parts
Simulation Drop Tester
Introduction of Equipment:
The free drop testing machine is suitable for free drop testing of
mobile phones (mobile phones), batteries, chargers, adapters,
walkie-talkies, electronic dictionaries, building walkie-talkies,
CD, MD, MP3 and other small consumer electronic products and parts.
This machine adopts pneumatic structure. The tested piece is placed
in a special fixture (adjustable stroke) to clamp firmly. Press the
drop key and the cylinder is released. The test piece will undergo
free fall test. The drop height can be adjusted up and down. With a
height scale, the drop height of the test piece can be known.
Various drop floors are available for selection and can meet
different test standards. This machine meets the test standards of
JIS C0044, IEC 60068-2-32, GB2423, UL 1642, UL2054, QC-T744-2006,
QC-T743-2006, GB-18287-2000, SJ-11169-1998, YD-1268-2003, SJ/T
11170-1998, GB8897.4-2002, etc.
Product Parameters:
| Drop height | 300-1500mm |
| Maximum drop weight | 2kg |
| Setting of falling height | display by digital display meter and scale ruler, and electric
lifting |
| Minimum detachment height | 300mm |
| Falling to the floor | iron plate |
| Fixing method | cylinder clamp |
| Operation mode | electric lifting height, pneumatic control drop |
| Bottom plate size | 550 × 550 mm |
| Machine size | about 550 × 550 × 1600 mm |
| Working power supply | AC220V, 50HZ |
Product Features:
1. The box body is treated with electrostatic baking varnish. The
whole machine is reasonable in design, safe, stable, accurate and
elegant in appearance.
2. Pneumatic clamping of the product, the front end of the fixture
is equipped with silicone rubber, so that the product is not easy
to deform;
3, the test height can be inched, electric lifting mode, high
precision steel ruler to indicate the test height;
4. Equipped with a protective box, it can prevent the mobile phone
from rushing out after falling.
