CP-2500A (12 m/min) glass washing machine technical , simple
operation, convenient
USES:
glass washing machine CP-2500A used for cleaning and drying the
upper and lower surfaces
of ordinary plate glass and high quality low-e glass,it is composed
of incoming segment,
cleaning air-drying segment and outgoing segment.
2, Structural characteristics:
- Aluminum alloy assembled structure, no scrap concept, permanent
use,
high efficiency, energy saving 70% efficiency；
2. The rest of the sheet metal parts are sprayed with advanced
mechanical
paint or powder；
3. The rubber roller is made of vulcanized rubber with stainless
steel shaft；
4. The washing part in contact with water is made of stainless
steel；
5. Cleaning department, wind staff overall lift, the maximum lift:
350mm,easy to clean and maintain；
6. Three pairs of brush(Ø150mm)Stainless steel shaft configuration
(low-e glass, ordinary coated
glass and sunshine coated glass can be washed without damaging the
coated surface)；
7. Two pairs of special stainless steel aluminum alloy air knife
configuration, strong wind, good air drying
effect, with heating system(with temperature control device,
optional opening and closing)；
8. The fan is equipped with air filter in the air inlet chamber,
with large air volume and good air drying
effect,The whole fan box is installed in the upper part of the
workshop, with the air filter screen on the
side for easy inspection and cleaning；
9. Main drive for gear transmission, frequency control, digital
display , the rotation of the brush roller in
the washing section is driven by independent belts of the upper and
lower motors respectively, the
frequency conversion adjustment speed is stable, the service life
is long, realizes the cleaning high request
special glass；
10. Mechanical button control, cleaning machine digital display,
easy to operate, easy to operate, easy to
maintain；
| Maximum glass width | 2500mm (effective maximum: 2650mm) |
| Minimum glass specification | 400mm×400mm (limited to single row on left and right sides) |
| Glass thickness | 3mm-25mm (digital display) |
| Speed range | glass thickness within 3-25mm Vmax=1-12m/min |
| Main drive, brush speed regulation method | frequency control |
| Table height | 900±25mm |
| Total power | 42KW(water-bearing wind heating: 15KW) |
| Water source | self-circulation, tap water (according to civil water standards)
and deionized water water supplement (deionized water equipment
shall be provided by the buyer) |
| Power source | 380V 50Hz |
| Dimensions (length × width × height) | approximately 6260*4800*3100 |
Jinan Lijiang Automation Equipment Co., Ltd. is located in the
beautiful spring
city------Jinan. It is an enterprise which integrated glass
processing equipment research and development, sales
and service into a whole. As it is close to Beijing-Shanghai
high-speed rail, the transportation is very convenient.
The company is committed to building high-end insulating glass
machinery and equipment by learning from famous
experts, establishing the research and development centers,
cooperating with domestic and foreign well-known
enterprises, importing advanced technology and so on. Now, our
friendly partners include North Glass, Xin Fuxing,
Yaohua, Dalian Huaying, Beijing Guanhua, Shanghai Hao Jing, Sichuan
Li Hehua and other well-known enterprises.
Since the establishment of the company, our products have been
exported to Europe, America, South America, the
Middle East, Southeast Asia, India, nearly 30 countries and
regions. At the same time, our company worked with the
well-known domestic research institutes, such as the North China
Industrial Group, Shandong University and others,
to constantly improve the level of technical research. So far, we
have independently produced the vertical automatic
IG production line with filling gas on line, the vertical IG
sealing robot, the automatic spacer bending machine, the
automatic desiccant filling machine and the new fully automatic
butyl extruder machine, its technology and quality
have reached the highest leading level in China.
With the rapid development of insulating glass industry, LIJIANG is
looking forward to working with you for win-win
situation and jointly creating a new world.
