Binding Type 10 Wheeler Truck Tire Pressure Monitoring System
TPMS Benefits
Puncture Protection: Real time monitor pressure and temperature nip
in the bud.
Save the Fuel: Keeping correct tire pressure, lower fuel
consumption.
Less Treadwear: Insufficient pressure causes treadwear which
shorten the tire life span.
component of product
Sensor and receiver corresponding wheel position number
Alarm function
leakage warning
Product parameters
| Receiver(26 rounds) | |
| Display interface | LCD segment code (26 tires with the same display) |
| Receiver port | Vehicle battery, ACC input and RS232 output(about receiver) |
| Machine weight (excluding packaging) | 230gram±5gram |
| Abnormal self-recovery | Toggle Switches(The switch is facing up, restart after
disconnecting the external power supply.) |
| Working temperature | -30℃-80℃ |
| Power supply mode | Internal rechargeable lithium battery and external power supply |
| Interface voltage | Vehicle battery 24V, ACC24V |
| Built-in battery voltage | 3.5V-4.2V |
| Bright working current | 12mA |
| Black working current (for data communication) | 4.5mA |
| Reception sensitivity | -95dbm |
| Dimensions | 13.5cm*6.5cm*2.2cm |
| Pressure range | 0bar~14bar/0psi~203psi |
| type | TRUCK TPMS FOR 10 wheeels |
| color | black |
Black color Universal internal binding type ten tire Truck TPMS For
Trailer Truck non include repeater
| Sensor (internal binding type sensor) | |
| Plastic parts material | Nylon + glass fiber |
| Machine weight (excluding bind belt) | 30gram±1gram |
| Shell temperature resistance | -50-150℃ |
| bind belt material | 304 stainless steel |
| Power supply mode | Button Battery |
| battery model | CR2050 |
| battery capacity | 345mAh |
| Working voltage | 2.1V-3.6V |
| Working temperature | -40℃-125℃ |
| working temperature | 8.7mA |
| Self-test current | 2.2mA |
| Dormant current | 0.5uA |
| Working temperature | -40℃-125℃ |
| Transmit frequency | 433.92MHZ |
| Transmit power | >-12dBm |
| Dimensions : | 7.3cm(length)*2.73cm(width)*2.2cm(height)(excluding antenna) |
Product attention
Sensor monitors pressure and temperature of tire and signal to
receiver, receiver reports pressure and temperature by number and
voice. If there is any abnormal pressure or temperature, flashing
warning icon and voice prompt will notice driver immediately.
Drivers need to check and repair the tire immediately, in order to
avoid risk of accident due to tire problem.
Tires have natural micro leakage phenomenon. It is a normal
phenomenon that pressure of tire decreases over time. Pressure
decreasing don't have directly relationship with install this
products.
It is a normal phenomenon that pressure is unstable due to thermal
expansion during driving. It don't have directly relationship with
install this products.
Incorrectly installation will affect the use of this product or
make damage. experienced technician is preferred to install this
product. please be careful not to damage the sensor transmitter
when disassembling tires again. Valve of internal sensor is not
available for repeat assembling/disassembling.
Please use power cable provided by factory. It is not allowed to
tie receiver by power cable, as I will damage product or effect
signal . And you will lose warranty.
Most of the DVD or other high power equipment in the market are all
have electromagnetic interference. In order to avoid
electromagnetic interference, receiver is suggest to install 50CM
away from such kind of products. The best position is upper left
corner, upper right corner of A column and middle of front seats
(away from control)
There won't be notice if there is any change of products (
performance, specifications, warranty).
* This system send signal by wireless transmission, so it may not
receive signal under some certain condition, like interference,
error operation or improper installation. If receiver can't receive
signal for 10 minutes, please drive car away from current place (
maybe there is strong signal interference ) or go to authorized
tire repair center to check is there any problem of sensor or
battery of sensor is run out( battery life maybe shorter than
normal use, as there is often abnormal condition occurs, sensor
need to send signal to warn driver.)
FAQ
Q1: What is your product and technique?
A: We produce TPMS products and measure tire pressure, temperature,
acceleration through TPMS products show you.
Q2: What is your product apply fields?
A: Our productsare applied to Automotive electronics industry.
Q3: How does purchase your existing product or customized my
product?
A-1: Existing product: Please go to choose your favorite product
and memorize product code, determine product request (e.g.: color,
lids / top, etc.) and order quantity, together with your consignee
address, phone, name and port of discharge etc.
A-2: Customized your product: Please mailing your existing sample
to us. If you have own design drawing (Include material name,
component weight, size, and configuration etc.details),
A-3: Once receive your any information or sample, we will send best
price and order process to you within 24 hour and continuously
follow-up services for you, answer your any problem, until your
receive the goods.
Q4: Are the product dependable?
A: Yes, we are dealing with Automotive electronics industry since
2013. We are attention to each client request and feedback; we have
established long term cooperation with them. All productsare
top-quality and quality guaranteed.
