Automatic Hydro Power Generator Generator Water Power Plant With
Remote Control
Our main products included
1. Kaplan turbine generators series.
2. Turgo turbine generators series.
3. Tubular turbine generators series.
4. Francis turbine generators series.
5. Pelton turbine generators series.
Automatic Pelton turbine Product features
The products are divided into vertical and horizontal models, which
are applicable to water head 80 ~ 1800m, the diameter of runner 0.6
~ 3.5m, and capacity 1 ~ 20MW.
Pelton turbine suit to water head 100 to 1000 meters and with a
certain small flow. It could be a vertical and horizontal
arrangement, nozzle numbers from one to six. Pelton turbine with
features of wide flow high-efficiency region. It could start the
turbine with 10% of the rated flow. Pelton turbine with one or two
nozzles usually adopt the horizontal arrangement, but multiple
nozzle Pelton turbine adopts vertical arrangement. Pelton turbine
units are wildly used in mountain areas all over the world, and
well known by its simple structure, less investment, high
efficiency, and reliable long service life.
1, Power station from water to water direction is basically the
axial direction penetration.such as bulb turbine hydropower station
of the feed water control and outlet pipe bend, simple shape, the
path of circulation of hydraulic damage reduction,convenient
construction .
2, Tubular turbine has high flow ability and larger specific speed,
so when the head and power are under the same conditions,tubular
turbine diameter is about 10% smaller than Turn to paddle
3, Hydro-power unit structure is compact,compared with the same
specifications of paddle unit,Its size is small,and it can be
decorated in dam body,cancel the complex diversionsystem,reduce the
construction area of factory building,reduce the excavated volume
and the amount of concrete,according to the relevant data
analysis,construction cost can be saved 20%-30%.
4, Tubular turbine work for reversible pump turbine running, due to
the in and out of the water without a sharp turn working condition
of pump and the turbine can get a better hydraulic performance.Such
as tidal power station can be two way with applications in power
generation,pumping,drainage and other three kinds of
functions.Therefore,it is suitable for comprehensive exploitation
and utilization of low head hydraulic resource.
5, Hydro-power is short in construction period, and results fast
generally than vertical axial-flow hydro-power station .
Unlike other types of turbines which are reaction turbines, the
Pelton turbine is known as an impulse turbine. This simply means
that instead of moving as a result of a reaction force, water
creates some impulse on the turbine to get it to move.
Automatic pelton turbine product parameters
| Pelton turbine generator unit | Generator | Gevernor or Regulating work |
| Turbine |
| Type | Water head(m) | Discharge (m³/s) | Output(kw) | Speed (r/min) | Type | Capacity (kw) |
| CJA237/475-W-90/2x7 | 245 | 0.51 | 1084 | 750 | SFW1000-8/1180 | 1000 | BWT-10000 |
| 283 | 0.55 | 1346 | SFW1250-8/1180 | 1250 |
| 333 | 0.6 | 1718 | SFW1600-8/1430 | 1600 |
| 393 | 0.65 | 2152 | SFW2000-8/1430 | 2000 |
| 449 | 0.69 | 2689 | 1000 | SFW2500-6/1430 | 2500 |
| 529 | 0.75 | 3439 | SFW3200-6/1730 | 3200 |
| CJA237/475-W-100/2x7 | 452 | 0.7 | 2686 | 750 | SFW2500-8/1730 | 2500 | BWT-10000 CJWT- II |
| 532 | 0.76 | 3441 | 1000 | SFW3200-6/1730 | 3200 |
| 614 | 0.81 | 4301 | SFW4000-6/1730 | 4000 |
| 710 | 0.87 | 5348 | SFW5000-6/1730 | 5000 |
| CJA237/475-W-110/2x9 | 203 | 0.77 | 1352 | 500 | SFW1250-12/1430 | 1250 | BWT-10000 CJWT- II |
| 238 | 0.84 | 1716 | 600 | SFW1600-10/1430 | 1600 |
| 277 | 0.9 | 2154 | SFW2000-10/1730 | 2000 |
| 322 | 0.97 | 2691 | SFW2500-10/1730 | 2500 |
| 378 | 1.05 | 3434 | 750 | SFW3200-8/1730 | 3200 |
| 439 | 1.13 | 4298 | SFW4000-8/1730 | 4000 |
| CJA237/475-W- 110/2x11 | 155 | 1.01 | 1359 | 428.6 | SFW1250-14/1730 | 1250 | BWT-10000 CJWT- II |
| 181 | 1.09 | 1719 | 500 | SFW1600-12/2150 | 1600 |
| 210 | 1.17 | 2144 | SFW2000-12/2150 | 2000 |
| 244 | 1.26 | 2691 | 600 | SFW2500-10/2150 | 2500 |
| 288 | 1.37 | 3450 | SFW3200-10/1730 | 3200 |
| 300 | 1.4 | 3535 | SFW3200-10/1730 | 3200 |
| 320 | 1.45 | 3926 | SFW4000-10/2150 | 4000 |
| 340 | 1.49 | 4317 | SFW4000-8/2150 | 4000 |
| 360 | 1.54 | 4702 | 750 | SFW4000-8/2150 | 4000 |
| 380 | 1.58 | 5082 | SFW5000-8/2150 | 5000 |
| 400 | 1.62 | 5469 | SFW5000-8/2150 | 5000 |
| CJA237/475- W-125/2x9 | 378 | 1.05 | 3434 | 600 | SFW3200-10/1730 SFW4000-10/1730 | 3200 | BWT-10000 CJWT- II |
| 443 | 1.14 | 4307 | 4000 |
Automatic pelton turbine product pictures
Company Information
Chengdu Forster Technology is focused on design and manufacturing hydro turbines. The company
was founded in 1956. Forster is the first Chinese state-owned
enterprise and spares no effort to expand international market in
2013,At present, we have obtained orders in many water-rich areas such
as Europe, Asia, South America, North America, etc., and as
partners, we are qualified as long-term suppliers in many regions.
The capacity of hydro turbines is up to 50KW-30MW for a unit. The
main hydro turbines areTurgo turbine ,pelton turbines, francis turbines, kaplan turbines ,bulb tubular turbines and other types of turbines.Foster also supplies governors, valves,
transformers, monitoring systems, microcomputer integrated control
panels and other equipment for hydroelectric power plants.
Advantages
1.Comprehensive processing capacity. Such as 5M CNC VTL OPERATOR,
130 & 150 CNC floor boring machines, constant temperature annealing
furnace, planer milling machine, CNC machining center ect.
2.Designed lifespan is 30-50 years.
3.Forster provide one time free site service,if the customer
purchases three units (capacity ≥100kw) within one year, or the
total amount is more than 5 units. Site service included equipments
inspection, new site checking, installation and maintainance
training ect,.
4.OEM accepted
5.CNC machining , dynamic balance tested and isothermal annealing
processed,NDT test
6.Design and R&D Capabilities,13 senior engineers with
experienced in design and research.
7.The technical consultant from Forster worked on the hydro turbine
filed for 50 years and awarded the Chinese State Council Special
Allowance
FAQ
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power
you need
, voltage, on grid or off grid operation, we will propose a
solution.
Q2, Can your factory provide all the equipment for hydropower
generation?
Yes, we can provide you with turbines, hydro-generators, pressure
regulators, turbine wheels, control panels, transformers,
monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including
measurement, design, manufacturing, construction, manufacturing,
commissioning, inspection, maintenance runner replacement and
refurbishment/upgrade/improvement/repair/refurbishment of
turbines/generators including bearings, seals For parts and key
parts, we will send technicians and workers to install equipment.
Q4, Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to
promote the international market in 2013. Our factory is located in
Sichuan, where China's water conservancy and hydropower is most
developed. Welcome to visit our factory in China.
Q5, What is an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6, How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the
model you are purchasing.
Q7, Does your company have its own independent official website?
Of course, and we can see more information about our company and
products on our official website. website address: www.fstgenerator.com
