China Clamp On Ultrasonic Flow Meter With Data Logger Velocity
0.03m/S~12m/S
I. Introduction
ML-6100S is a wall-mount, clamp- on type ultrasonic flow meter
which uses the transit-time technology. Designed using FPGA chip
and low-voltage broadband pulse transmission.Both clamp on type
sensors and insertion type sensors are available.
ML-6100S has a 240*128 back lit LCD with 4 line menu display and
also the clear,user-friendly menu selections make flow meter more
simple and convenient to use.Daily, monthly yearly totalizer.
Parallel operation of positive, negative and net flow totalizer
with scale factor (span) and BTUcapacity. While the output of
totalizer pulse and frequency output are transmitted via relay and
open collector.
ML-6100S can be used in conjunction with the RTD module and the
PT1000 temperature sensor to become an energy meter for measuring
the heat and cold consumption of heating pipelines and
air-conditioning refrigeration pipelines;
The PT1000 uses high-temperature resistance lines, imported
movements,and its sensitivity and working conditions durability are
much higher than those of domestic PT100.
II. Working Principle
The external clamp or pipe segment ultrasonic flow meter is a meter
that measures the liquid flow in the round tube according to the
principle of "speed difference". It uses advanced multi-pulse
technology, signal digital processing technology and error
correction technology, so that the flow meter can be more adapted
to the industrial field environment, measurement is more
convenient, economical and accurate. Products reached the advanced
level at home and abroad, can be widely used in petroleum,
chemical, metallurgy, electricity, water supply and drainage and
other fields.
III. Specification
| Performance |
| Velocity Range | ±0.09ft/s ~ ±39ft/s (±0.03m/s ~ ±12m/s) |
| Accuracy | ±1% of measured value |
| Repeatability | 0.2% of measured value |
| Linearity | ±1% |
| Pipe Size | DN25~DN1200(A pair of sensors) |
| Function |
| Output | Analog output: 4~20mA, max load 750Ω. |
| Pulse output: 0~10KHz |
| Communication | RS232/RS485 Modbus |
| Power Supply | 10~36VDC/AC90~245V |
| Display | 240*128 back lit LCD |
| Temperature | Transmitter: -14℉~140℉(-20℃~60℃) |
| Transducer:-40℉~176℉(-40℃~80℃,TT01) |
| Transducer:-40℉~266℉(-40℃~130℃,TT03) |
| Humidity | Up to 99% RH,non-condensing |
| Physical |
| Transmitter | PC/ABS,IP65 |
| Transducer | Encapsulated design,IP68 |
| Double-shielded transducer cable |
| Standard/maximum cable length:30ft/1000ft(9m/300m) |
IV. Product Size
V. Configuration
| Model | Transmitter |
| ML-6100S | Wall-mounted Type |
| Velocity Range:±0.09ft/s ~ ±39ft/s (±0.03m/s ~ ±12m/s) |
| Accuracy :±1% of the measure value |
| Repeatability:0.2% of the measure value |
| Display:240*128 back lit LCD |
| Power Supply: 10~36VDC/AC90~245V |
| Transmitter Enclosure: IP65, ABS (Temperature: -20℃~50℃) |
| Output: OCT pulse output 0-10KHz, Relay output, 4-20mA for option |
| Communication: RS232,RS485 |
| Code | Output |
| 1 | OCT,Relay,RS232/RS485,4-20mA |
| 2 | OCT,Relay,RS232/RS485,4-20mA, RTD |
| Code | Transducer |
| TT01 | Clamp-on, IP68. Operating temperature:-40 ℉ ~ +176 ℉(-40℃ ~ +80 ℃) |
| TT03 | Clamp-on, IP68. Operating temperature:-40 ℉ ~ +266℉(-40℃ ~ +130 ℃) |
| TT05 | Insertion, IP68. Operating temperature:-40 ℉ ~ +266 ℉(-40℃ ~ +130
℃) |
| Code | Transducer Cable Length |
| 030 | Standard length 30ft (9m) |
| XXX | Max length to 1000ft (300m) |
| Code | Temperature Transducer |
| PT1000 | PT1000 temperature transducer+RTD module(option) |
| Code | Data Logger |
| SD | SD card(8G)+ SD card module(option) |
