Disposable Mask Ear Loop Welding Machine
Product Introduction
This equipment has solved the problem of difficult operation and
high defective rate of automatic production line.Only 1 person is
needed to invest in the equipment, and it adopts automatic
induction and manual button to turn on the machine. The equipment
automatically cuts the ear loop, aims at the position ,and welding,
so as to quickly meet the product quality requirements.
Equipment structure:
- PLC programming control, servo drive, high precision
- High stability, low failure rate, beautiful and rust free
- The equipment is installed by sectional rack, which is convenient
for loading and unloading in the factory
- The table adopts pulley and fixed foot, which is convenient and
fast to move, strong in fixity and no shaking
- The machine adopts ultrasonic sealing, once finished, low noise,
smokeless, tasteless, no need to brush glue, environmental
protection and pollution-free
- High production efficiency
- The ear belt is automatically loaded, and the mask body is manually
loaded
- Small machine floor area
- Open design with good windows
- Adopt human-machine combination, debugging and easy maintenance
Easy to operate, low cost, strong and durable.
20-40pcs/min Efficiency: 20-40pcs / min
Technical Parameter
Number | Name | Parameter |
| 1 |
Type | 2AT.JZKZHRDBZD-A |
| 2 |
Dimensions | 700(length)*600(width)*1500(height) |
| 3 | Weight | Total weight≤200KG Table Loading Capacity 200KG/㎡ |
| 4 |
Working Power |
220VAC±5% 50HZ Ground Protection Rated power≤10KW(including machine) |
| 5 |
Compressed Air | 0.4-0.6MP (Clean air after removing water, no oil, filtration,
stabilized pressure) Operation flow about 300L/min |
| 6 |
Production Efficiency | 20-40PCS/min |
| 7 |
Product Qualification Ratio | 99% (Original material and manual operation are excluded) |
| 8 |
Primary Attachments | Air cylinder:AirTAC Screw guide rail:HIWIN/TBI PLC:Mitsubishi or Thinget |
| 9 |
Operating Environment | General workshop environment (no corrosive odor, no dust) |
Feature:
1. The automatic mask making machine is automatic from material
feeding to mask collection.
2. High automation in ear-loop welding, edge wrapping, counting,
and material discharging. The ultrasonic technique does no harm to
the characteristic of the material. Easy and safe operation.
3. Artistic and durable, aluminum alloy board, lean and
practicality.
4. Faster, Rotary connection device of Independent innovation
design.
5. More stable, upgraded machine, MITSUBISHI PLC control system,
touch screen, Taiwan photoelectric detection, stable performance,
and low failure rate.
