Automatic Earloop Dustproof Medical Face Mask Making Machine
Automatic ear loop disposable surgical mask machine (1 blank mask
machine+2 ear loop welding machines) is a fully automatic machine
that can realize a series of process including material
feeding,nose clip welding,blank mask welding/folding/cutting,ear
loop welding/binding until a completely mask is finished.
Technical Parameters
Import raw materials, automatic feeding, nose line cutting /
feeding, hemming welding, folding scene, forming welding,
photoelectric detection, automatic slicing, finished product
output, receiving tray sorting, full automation
| Name | Parameter |
| Voltage | AC220V 50-60HZ |
| Power | 3.5KW |
| One-to-two production efficiency | more than 100 pieces / min |
| size | 6500 (length) * 3500 (width) * 1950 (height) |
| Weight | Total equipment weight ≤5000KG Ground load 3500KG / ㎡ |
| Color | Color Sheet metal warm gray 1C, primary color of aluminum profile |
| Working power supply | 220VAC ± 5% 50HZ grounding protection Rated power ≤10KW (including
welding machine) |
| Compressed air | 0.4-0.6MP (clean water after dewatering, no oil, filtration,
pressure stabilization), use flow rate is about 300L / min |
| Production efficiency | ≥100PCS/min |
| The product qualification rate | 99% (except for the original material and human operation) |
| Main accessories | Cylinder: AirTAC Screw guide rail: HIWIN / TBI PLC: Mitsubishi or
Xinjie |
| Operating environment | General workshop environment is acceptable (no corrosive odor, no
dust) |
Item | Material | Specification | Coil outer diameter | Coil inner diameter |
| 1 | Outer non-woven fabric | 200mm wide roll material | Recommended less than 600mm | greater than 65mm |
| 2 | Inner layer non-woven fabric | 190mm wide roll material | Recommended less than 600mm | greater than 65mm |
| 3 | Melt tape | 175mm wide roll material | Recommended less than 600mm | greater than 65mm |
| 4 | Nose bridge strip | 3.0mm wide roll material | Recommended less than 400mm | greater than 65mm |
| 5 | ear straps | 2.8mm round coil | | |
Feature
1. Aluminium alloy structure is adopted, which is beautiful and
firm without rust.
2. Computer PLC programming control, high stability, low failure
rate and low noise.
3. Servo motor imported from Taiwan, stepper motor drive, high
precision.
4. Photoelectric detection of raw materials to avoid mistakes and
reduce waste.
5. This equipment can supply 2 inner ear strap machines or outer
ear strap machines.
6. The machine adopts pulleys and fixed feet, which is convenient
and fast to move, strong in fixation and unshakable.
7. This model is equipped with a new advanced conveyor belt, which
automatically collects products with high accuracy, and only needs
to be sorted and packed.
