Surgical Semi Automatic Earloop N95 Mask Making Machine
Semi automatic KN95 mask machine,from the cloth into the finished
products to complete automation, automatic add nose bridge strip,
ear band welding, folding, molding fusion and finished products cut
off, waste elimination, finished products output fully realized
automatic production on a machine, the whole machine only needs one
person to operate.
Working Process
Cloth material roll feeding- rollers transmission--- multilayers
cloth folding-fixed length cutting of nose bridge pressing
strip-ultrasonic pressing----cutting waste material
(optional)----ear loop pressing and mask forming-
folding-ultrasonic folding----removing waste material
(optional)---cutting-finished masks.
Semi-automatic film machine
The equipment solves the defects of the current fully automatic
line, which is difficult to operate and has a high defect rate. The
equipment only needs 1 person, using the touch screen method,
manual and automatic switching. Automatically built nose bridge,
knurling, rolling cutting are achieved
| No. | Name | Parameter |
| 1 | Type | 2AT.JZKZHRDBZD-A |
| 2 | Size | 370 (length) * 80 (width) * 150 (height) |
| 3 | Weight | Total equipment weight ≤ 200KG Ground load 200KG / ㎡ |
| 4 | Working power supply | 220VAC ± 5% 50HZ grounding protection Rated power ≤10KW (including
welding machine) |
| 5 | Compressed air | 0.4-0.6MP (clean water after dehydration, no oil, filtration,
pressure stabilization), use flow rate is about 300L / min) |
| 6 | Production efficiency | 20-40PCS/min |
| 7 | product qualification rate | 99% (except for the original material and human operation) |
| 8 | Main accessories | Cylinder: AirTAC Screw guide rail: HIWIN / TBI PLC: Mitsubishi or
Xinjie |
| 9 | Operating environment | General workshop environment is acceptable (no corrosive odor, no
dust) |
Semi-automatic earloop welding machine
This equipment solves the defects of the current fully automatic
line, difficult operation, high defect rate, etc., only one person
is required in the equipment, using automatic induction and manual
button type, the equipment automatically cuts the ear strap line,
automatic alignment, automatic welding, and quickly reaches product
quality demand.
Semi-automatic V-shaped edge banding machine
This equipment solves the defects of the current fully automatic
line, difficult to operate, high defect rate, etc., only one person
is required to use the equipment, the foot switch type is adopted,
the equipment automatically depresses the ultrasonic wave, the
manual alignment is accurate, convenient, automatic welding,
quickly meet the product quality requirements .
Semi-automatic earloop welding machine Semi-automatic V-shaped edge banding machine
Our Service
Pre-sale Service
-- 12-hour sales on line consulting stand by
-- Customized and feasible solution design
-- Well-train sales answer you in fluent English
In-sale Service
-- Production line planning
-- Assured and high-efficient delivery time
--Inspection video and reports
After-sale Service
-- Engineers are available overseas for installation & testing
-- Emergency Call-out for 12-hour every day
-- Technical Manual, Troubleshooting
-- Installation Video
-- On-going Technical Support
-- Lifetime maintenance
