Huawei 5G high density DC embedded power supply -48V 24KW 3U height
ETP48400-C3B1
Introduction
ETP48400-C3B1 is a new type of embedded power supply developed by
Huawei.
Architecture design, small size, high power density (capacity up to
24kW, 3U height), power distribution
Can be modularly expanded, with features such as convenient
installation and maintenance, full digitalization and full
intelligence, suitable for
Used for capacity expansion and reconstruction of existing wireless
sites, new 3G/4G wireless sites and new 5G wireless sites
Waiting for the scene.
Features
*l Small size, 3U height, high power density
* Innovative architecture design supports modular expansion of
power distribution
* Wide AC voltage input range: 85VAC～300VAC
* Supporting intelligent power distribution unit, supporting
multi-level power-off management, matching 5G business network
diversification
* Supporting Huawei BoostLi lithium battery supports -57VDC
constant voltage output, meeting 5G high power AAU pull Far power
demand
* Intelligent peak-shaving, site-free electric power renovation:
When the peak load exceeds the mains input power, the power
* The source controls the battery discharge, and the mains and the
battery cooperate to supply power to the load, eliminating the
mains supply peak
Value, reduce the investment required for the expansion of the
city’s power capacity
* Intelligent peak mismatch, release site potential: adaptive
adjustment of power grid, make full use of peak and valley
electricity price difference,
Reduce site electricity consumption
* Intelligent management, remote online maintenance, reducing the
number of drop-off times and maintenance costs
Application
* Capacity expansion of existing wireless stations
* New 3/4G wireless site
* New 5G wireless site
Specifications
Model | ETP48400-C3B1 |
System | Size(W× D × H ) | 442mm × 330mm × 130mm |
Weight | <20kg (no rectifier) |
Install mode | 19 inch rack install |
Cabling mode | Front in front out |
Maintenance mode | Front maintain |
Noise level | ETSI300753 standard Class3.1 |
AC input | Input type | Three phase compatible single phase |
Input voltage | Three phase:147VAC～519VAC；Sinle phase:85VAC～300VAC |
Input frquency | 45~65Hz,Rated: 50Hz/60Hz |
Input Breakers | 1 × 63A/3P MCB |
SPD | 20kA/40kA(8/20μs) |
DC distribution | Output voltage | Normal mode:42VDC ~ 58VDC,Rated: 53.5VDC
5G mode :57VDC(optional BoostLi battery) |
|
Max capacity | 24kW(6 × 4KW) |
Battery load | Dould load OTterminals ,2 × 200A |
LLVD | 2 × 125A MCB,3 × 63A MCB |
BLVD | 2 × 63A MCB,2 × 32A MCB,2 × 16A MCB |
SPD | 10kA/20kA(8/20μs ) |
Rectifier | Mode | R4875G5 | R4850G5 |
Input voltage | 85VAC～300VAC, Rated 220VAC |
Rated power | 4000W(176VAC～300VAC)
4000W ~ 1600W(175VAC～85VAC(Linear derating) | 3000W(176VAC ～ 300VAC)
3000W ~ 1250W(176VAC ~ 85VAC(Linear derating) |
Efficiency | Max 97% | Max 96% |
Work temperature | -40℃~+75℃ |
Size(W× D × H) | 105mm × 281mm × 40.8mm |
Weight | ≤2.2kg | ≤2.0kg |
Power factor | ≥0.99 |
THD | ≤5% |
Controller | Singnal input | 2 load AI(battery tem,enviroment tem)
4 load DI(1 load door sensor,1load smoke sensor,1load water
sensor,,1 load reserve) |
|
Alarm output | 8 loads DO |
Communication | RS232, RS485, CAN,FE |
Storage | Up to 1000 histroy alarms report |
Screen | LCD,support Mobile APP |
Networking mode | IP,GPRS,Internet |
Environement | Work tem | -40℃ ~ +65℃ |
Storage tem | -40℃ ~ +70℃ |
Operating humidity | 5% ~ 95%(No condensation) |
Altitude | 0 ~ 4000m (temperature derating in 2000m～4000m, every 200m
increase, working temperature decreases by 1℃) |
PDU(optional) | Size(W× D × H ) | 442mm × 255mm × 43.6mm |
Load | Secondary load:6 × 63A,4 × 32A
Important load: 2 × 32A,2 × 20A,2 × 16A |
|
