IC693APU300J GE PLC High Speed Counter Module
⇒ Click here for good price IC693APU300J
| Brand/Manufacturer | GE /USA |
| Part Number | IC693APU300J |
| Alternate Part Number | IC693APU300J |
| Description | MOTOR SERVO |
| Dimennsions | 15.2 cm x 15.2 cm x 5.1 cm |
| Weight | 0.4kg |
Contact Us
Email: miya@mvme.cn (KLICK)
QQ: 2851195450
Tel: 86-18020776792(KLICK)
Skype:miyazheng520(KLICK)
Product Details
IC693APU300 is a high speed single slot counter belonging to the
90-30 series of PLCs. The module can be used where pulse input
rates are greater than the PLCs input capability or where a
significant percentage of the PLC’s processing capability is
required.
The high-speed counter allows direct processing of rapid pulse
signals of up to 1 MHz for industrial applications such as material
handling, meter proving and velocity measurement. With the direct
processing capability, the high-speed counter can detect inputs,
count and respond with outputs without the need of communicating
with a CPU. It’s configurable to count either up or down, both up
and down or to count the difference existing between two variables.
The module can be configured to provide either 1 complex counter, 2
identical and complex counters, or 4 identical and independent
simple counters. The module comes with 12 positive source inputs
with an input voltage range of either 5 V DV or 10 to 30 V DC.
Furthermore, you’ll find 4 positive source outputs, internal module
diagnostics, and a removable terminal board used during field
wiring.
The IC694APU300 module provides two modes of operation when used in
an RX3i system: Classic and Enhanced. By default, the module
operates in classic mode. However, if you desire to use enhanced
features, select ‘Enhanced mode’ using the machine edition
configuration tool.
Enhanced features include Support for up to 1 MHz input frequency
from external devices and up to 2 MHz internal oscillator at clock
input 1, support for both 32-bit counters and Z input events,
configurable outputs, rollover detection flag and support for
firmware updates over the backplane from the RX3i CPU. IC693APU300
also has a windowing feature that allows a user to define a range
of counter accumulator values where the strobe is recognized as a
valid input. Should the counter accumulator go outside this range,
the strobe input is ignored. Since the module is considered an open
type equipment, it should be installed into an enclosure with
minimal pollution. For wiring connections, use copper wire with a
minimum rating of 90 degrees Celsius. If two wires are allowed,
then they should be of the same type. Before wiring, replacing
modules, batteries, fuses or any other serviceable component, it’s
recommended to TURN OFF the power. This is to avert any mishaps
that may occur. Moreover, the product should be mounted in an
enclosure certified for use in Zone 2, Group IIC, and rated IP54
minimum. During field wiring, shielded cable must be used for all
cables connecting to the IC694APU300 High-speed Counter. The
shielded cable should possess a high frequency ground within 6
inches of the IC694APU300 module.
Our advantages
1) TRICONEX(3008,3625,3805E.3721,3700A 4351B...)
2) BENTLY NEVADA(3500/42M ,3500/22M,3500/95.3500/05...)
3) HIMA(F3330,F3236 ,F6217,F7126,F8621A....)
4) FOXBORO(FBM203,FBM204,FBM217,FMB231...)
5) Allan-Bradley (1756,1785,1771,1746,1769..)
6) ABB (DSQC .....)
7) GE(IC693,IC697,IC695,IS200,DS200)
8) BACHMANN(CM202,DI232,MPC240,NT255,AIO288...)
9) ICS (T8403,T8431...)
More Products
| GE | IC694MDL655 | GE | IC694MDL754 |
| GE | IC694MDL655 | GE | IC670CHS001 |
| GE | IC693ALG223 | GE | IC693MDL655 |
| GE | IC695ALG626 | GE | IS200ERAXH1A |
| GE | IC694TBB032 | GE | IC695ALG616 |
| GE | IC695PSD040 | GE | IC697ACC701 |
| GE | IC695ALG626 | GE | IC695CPU315 |
| GE | IC693MDL645H | GE | IC695ALG708 |
| GE | IC697PWR711 | GE | IC693CHS397 |
| GE | IC694MDL660 | GE | IC693PBM200 |
