Main feature of glass washing machine
* The rubber roller is made of vulcanized rubber with stainless
steel shaft；
* The washing part in contact with water is made of stainless
steel；
* The rest of the sheet metal parts are sprayed with advanced
mechanical paint or powder；
* Aluminum alloy assembled structure, no scrap concept, permanent
use,high efficiency, energy saving 70% efficiency；
* Cleaning department, wind staff overall lift, the maximum lift:
350mm,easy to clean and maintain；
* Three pairs of brush(Ø150mm)Stainless steel shaft configuration
(low-e glass, ordinary coated glass and sunshine coated glass can
be washed without damaging the coated surface)；
* The fan is equipped with air filter in the air inlet chamber,
with large air volume and good air drying effect,The whole fan box
is installed in the upper part of the workshop, with the air filter
screen on the side for easy inspection and cleaning；
* Two pairs of special stainless steel aluminum alloy air knife
configuration, strong wind, good air drying effect, with heating
system(with temperature control device, optional opening and
closing)；
* Main drive for gear transmission, frequency control, digital
display , the rotation of the brush roller in the washing section
is driven by independent belts of the upper and lower motors
respectively, the frequency conversion adjustment speed is
stable,the service life is long, realizes the cleaning high request
special glass；
* Mechanical button control, cleaning machine digital display, easy
to operate, easy to operate, easy to maintain；
* Optional with PLC control, touch screen display.It is convenient
for workers to operate and maintain, and can be connected to all
manufacturers of edge grinding machines without gap
* Washing machine water tank outside, convenient water tank
cleaning, water change, check, so that the washing machine cleaning
effect is cleaner.
Technical parameter
| Max frame size | 2000mm*2000nn (2500mm*2500mm) |
| Min frame size | 300mm*250mm |
| Aluminum specifications | 6A - 27A |
| Air source | ≥0.65MPa |
| Power supply and power consumption | AC220V 50Hz 1.5KW |
| Molecular sieve diameter needed | 0.5-0.8mm |
| Dimension | 1650mm*1100mm*3600mm |
Detail of Glass Washing And Drying Machine
►The washing machine uses six soft (Low-e) brushes with the 01mm
diameter only.
It has 6 brushes which are all soft brush, can wash low-e glass,
flat glass, tempered glass and so on. It has a diameter of less
than 0.1mm bristles, never damage glass, especially for low-e
glass.
►The noise can be controlled below 90 decibels by using nylon gear
and sponges.Using Europe's advanced anti-noise system to create a good working
environment for employees.The noise can be controlled below 90 decibels by using nylon gear
and sponges.
Related product
Desiccant Filling Machine LJGZ 2020A
Main feature
• Germany Siemens PLC control system
• Touching screen interface, simple and visible
• The height can be adjusted according to the size of spacer frame
• Automatically drilling, filling and sealing
• Automatically loading and replenish desiccant
• Filling time can be adjusted
• Using big plastic barrel, save feeding time and improve
efficiency
• Protection device for machine head
• Adopt vacuum pump loading device ,increase the loading speed
• Core parts are imported brands
• Arc frame (optional)
• Fill large particle molecular sieve (Optional)
