IC697PWR710 GE Power Supply
⇒ Click here for good price IC697PWR710
| Brand/Manufacturer | GE /USA |
| Part Number | IC697PWR710 |
| Alternate Part Number | IC697PWR710 |
| Description | MOTOR SERVO |
| Dimennsions | 6.5x21.8x29.3cm |
| Weight | 1.02kg |
Product Details
The IC697PWR710 is a 90-70 Series 55 Watt Power Supply Module
manufactured by GE Fanuc. The IC697PWR710 module is designed to
operate from a 120 VAC or 264 VAC nominal line. The input voltage
range of 90 to 264 VAC, 47 to 63 Hz will be accepted by the power
supply. The power supply can also operate with a 125 VDC nominal
line. There is an electronic overvoltage protection circuit
included the power supply. If the 5 volt bus exceeds 6.2 volts, the
circuit will lock the output. The power supply fuse will not open
due to output external overvoltage, but the fuse can be opened if
overvoltage resulted from an internal fault in the power supply.
The fuse may be replaced with a 1 amp 250 volt 5x20 mm fuse.
The IC697PWR710 module is rack-mounted, and the unit plugs straight
into a 48-pin connecter located in the leftmost slot in the rack.
The power supply can be used either in a single rack application or
as a power supply to a second rack if the total load is within the
supply rating. There is a prewired cable available used for
interconnection of the second rack. There are four terminals
attached to the input terminal board. Two top terminals (L1 and N)
are connections for input powers of 120/240 VAC or 125 VDC. The
last two terminal connections are for overload device protection
and ground. Connections for power input are designed for copper AWG
wire, sizes #16. Terminals can operate with solid standard wires,
but wires into any terminal should be the same type and size. For
proper grounding, it is recommended that the ground terminal on the
power supply be connected to the GND terminal located on the rack
with copper AWG #12 wires.
Why Choose Moore?
The reason is simple. We offer the best value on quality industrial
equipment covered by industry leading buyer protection.
The Sales Team at amikon is constantly scanning the web to ensure
we are offering the lowest prices possible.
However, if you think we can do better, feel free to make an offer
on any of our products.
We pride ourselves on saving you money! Here is how to make an
offer.
The Offers Team does its best to respond to offers in a timely
manner. Typical turn-around time for an offer is 24 hours.
More Products
| GE | IC600LX648 | GE | IC670GBI002 |
| GE | IC600LX648 IC600FP608K IC600LX648L | GE | IC670MDL241 |
| GE | DS200LDCCH1ARA | GE | IC670MDL740 |
| GE | IC600CB526R | GE | MMII-PD-1-2-120 |
| GE | IC697CPM790 | GE | IC200CBL001 |
| GE | IC697BEM731 | GE | IC695PSA040 |
| GE | HE697RTM700 | GE | IC697CPX935 |
| GE | IC670CHS002 | GE | IC695CPE330 |
| GE | IC670MDL730 | GE | IC698CRE030-FH |
| GE | IC670MDL930 | GE | IC698CRE030 |
Contact Us
Email: miya@mvme.cn
QQ: 2851195450
Tel: 86-18020776792
Skype: miyazheng520
