IC693NIU004 GE Ethernet Network Intrface Unit
⇒ Click here for good price IC693NIU004
| Brand/Manufacturer | GE /USA |
| Part Number | IC693NIU004 |
| Alternate Part Number | IC693NIU004 |
| Description | MOTOR SERVO |
| Dimennsions | 3.6x13x13.5cm |
| Weight | 0.38kg |
Product Details
The IC693NIU004 is a GE Fanuc 90-30 series Ethernet Network
Interface Unit. This operates as an Ethernet Global Data station
(EGD), exchanging input and output data, status and control data
over the network. The unit comes with 8 LEDs, an ethernet restart
push button, 3 port connectors, and a shield ground connection tab.
The Mac Address label can be located on the outside of the module.
The IC693NIU004 ENUI comes with 8 LEDs. The EOK, LAN, STAT and PS
port indicate the status of the module. The other four LEDs are
linked to the two RJ-45 ports. The power supply LED is not related
to the ethernet ports but only indicates the presence of traffic
through the serial ports of the module’s power supply. The EOK, LAN
and STAT LEDs can be On/OFF Blinking slow or Blinking fast. These
indicate the status of the Ethernet interfaces, traffic at the
Ethernet ports (LAN LED) and that an exception event has occurred.
Every RJ-45 ports comes with 2 LEDs just as you would find on a
PC’s RJ-45 port. The one labelled LINK/ACT comes on when the link
is physically present and blinks when traffic is detected on that
port. The other indicator labeled 100Mbps comes on to indicate that
the connection is 100Mbps.
The ethernet restart push button has 2 functions: performing the
LED test and restart. Pressing the Ethernet restart push button
will have the effect of disrupting ethernet communications, this
includes any communication to other devices attached to the
embedded switch. When the Ethernet restart pushbutton is pressed,
the 7 LEDs come on simultaneously. One should ensure that the LEDs
go OFF and ON. The interface then performs a restart. Power
diagnostics run and interface’s software is restarted to
operational state.
The RS-232, 6-pin, RJ-11 port is for connecting a terminal or
terminal emulator to access the station manager software on the
ethernet interface. The Station Manager feature is used for testing
and troubleshooting Ethernet communications. Its use is, however,
optional. A IC693CBL316A cable is used for connecting the terminal,
emulator or software loader to the ethernet. The user can find 2
RJ-45 Ethernet ports on the NIU. One or both may be attached to
other ethernet devices. Each port automatically senses data rate
(10Mbps or 100Mbps), half or full duplex and cabling arrangement:
either straight through or crossover. Cables used to connect to the
ENUI can be either shielded or unshielded, direct or crossover. It
should be noted that the two ethernet ports should not be connected
to the same device as this will lead to duplication of packets.
Before the Ethernet NIU is used on the network, it must be
configured using the CIMPLICITY Machine Edition Logic Developer
software.
Why Choose Moore?
The reason is simple. We offer the best value on quality industrial
equipment covered by industry leading buyer protection.
The Sales Team at amikon is constantly scanning the web to ensure
we are offering the lowest prices possible.
However, if you think we can do better, feel free to make an offer
on any of our products.
We pride ourselves on saving you money! Here is how to make an
offer.
The Offers Team does its best to respond to offers in a timely
manner. Typical turn-around time for an offer is 24 hours.
More Products
| GE | IC698ETM001 | GE | IC200MDL241 |
| GE | IC695ACC400 | GE | IC200CMM020 |
| GE | IC693NIU004 | GE | IS220PDOAH1B |
| GE | IC693MDL1231 | GE | IS200SRLYH2A IS200SRLYH2AAA |
| GE | IC693ACC307 | GE | IS220PAICH1B |
| GE | IC697BEM763 | GE | IC693MDL732 |
| GE | IC697CHS790 | GE | IS220PTURH1A |
| GE | IC693ACC302 | GE | IC697PWR710 |
| GE | VMIPCI-5565-110000 | GE | IC697MDL654 |
| GE | IC200MDL742 | GE | IC693ALG390 |
Contact Us
Email: miya@mvme.cn
QQ: 2851195450
Tel: 86-18020776792
Skype: miyazheng520
