IC693ALG220 GE Analog Input, Voltage/Current, 4 Channels
⇒ Click here for good price IC693ALG220
| Brand/Manufacturer | GE /USA |
| Part Number | IC693ALG220 |
| Alternate Part Number | IC693ALG220 |
| Description | MOTOR SERVO |
| Dimennsions | 3.6x13x13.5cm |
| Weight | 0.35kg |
Product Details
The IC693ALG220 is a Channel Analog Voltage Input module for the
Series 90-30. This Programmable Logic Controller delivers four
input channels, each able to convert an analog input signal to a
digital signal as needed by the user. The module can convert inputs
in the range of -10 to +10 volts. Conversion speed for each channel
is 1 ms, thus providing an update rate of 4 ms for any channel.
Converted signal resolution is 12 bits binary. User data in the %AI
registers is in 16-bit 2’s complement format.
This input module is equipped with a limited current input mode and
a jumper on the user terminal connector for each channel. The
latter can be used to connect the internal 250 ohm shunt resistor
to the circuit. The shunt resistor allows a –40 to +40 mA current
input range. It is important, however, for the user to monitor
input current to avoid self-heating of the input resistor.
Otherwise, current accuracy could be negatively affected. The
primary power source for the IC693ALG220 comes from the isolated
+24 VDC power supplied via the PLC power supply. Voltage is sent
through an inverter/regulator to yield operating voltages for the
module. The IC693ALG220 uses 27 mA from the +5 VDC output of the
PLC power supply.
This module is also equipped with an LED to alert the user
regarding operation. This LED is conveniently located near the top
of the faceplate. During normal operation, the LED will emit the ON
status. Utilizing optical isolation, this module creates electrical
isolation of external noise between field wiring and the backplane.
To reduce the capacitive loading and noise, it is recommended that
the module’s field connections be wired using an appropriate grade
of twisted/shielded instrumentation cable.
Why Choose Moore?
The reason is simple. We offer the best value on quality industrial
equipment covered by industry leading buyer protection.
The Sales Team at amikon is constantly scanning the web to ensure
we are offering the lowest prices possible.
However, if you think we can do better, feel free to make an offer
on any of our products.
We pride ourselves on saving you money! Here is how to make an
offer.
The Offers Team does its best to respond to offers in a timely
manner. Typical turn-around time for an offer is 24 hours.
More Products
| BENTLY NEVADA | 330130-045-01-00 | BENTLY NEVADA | 330130-040-03-00 |
| BENTLY NEVADA | 129478-01 | BENTLY NEVADA | 330710-000-060-10-02-00 |
| BENTLY NEVADA | 330130-085-02-05 | BENTLY NEVADA | 330105-02-12-10-02-05 |
| BENTLY NEVADA | 3300/40 | BENTLY NEVADA | 133819-02 |
| BENTLY NEVADA | 3500/50 133388-02 | BENTLY NEVADA | 23732-01 |
| BENTLY NEVADA | 136188-01 | BENTLY NEVADA | 330103-00-03-10-01-00 |
| BENTLY NEVADA | 330103-10-14-10-02-05 | BENTLY NEVADA | 990-04-70-02-00 |
| BENTLY NEVADA | 139554-01 | BENTLY NEVADA | 3300/16 |
| BENTLY NEVADA | 330850-90-00 | BENTLY NEVADA | 330850-90-CN |
| BENTLY NEVADA | 330130-085-00-05 | BENTLY NEVADA | 136711-01 |
Contact Us
Email: miya@mvme.cn
QQ: 2851195450
Tel: 86-18020776792
Skype: miyazheng520
