Pre Washing Section Vertical Glass Washing Machine With Stainless
Steel And Soft Brushes
Vertical Glass Washing Machine
• 01 transfer section
Coating detection mechanism, automatic detection of offline Low-e
film
• 02 washing machine
Main feature:
• Using 6 pieces of soft brushes with 0.1mm soft hair, can wash
low-e glass
• Pre-washing (Optional)
• New air knife uses aluminum profile (Duckbill Air Knife), the
size of the air outlet is adjusted by the aluminum profile duck
beak. This can reduce the number of adjusting screws, ensure that
each screw is not loose, and avoid the resonance of the air knife.
• The air knife can automatically adjust the width of the air knife
according to the thickness
• The operation box with washing speed display, can accurately
display washing speed (8-10m)
• Water tank automatic temperature control, water replenishing
system
• European silencer system
• Stainless steel material
• 03 discharge section
• Storage glass
Main performance features:
The high-strength polymerized plastic spraying back plate with
folding structure
The whole process PLC control system, human-machine interface touch
screen
Automatic identification of coating and Low-E glass
Online and offline Low-E glass can be cleaned
Automatic temperature control and washing system of water tank
The noise reduction system is combined with the stainless steel air
drying system
Intelligent intermittent energy saving working mode
Digital display glue depth adjustment device
Adjustable matrix separated plate pressing system
Automatic lateral rotary positioning system for glass
Connection mode of aviation plug
Automatic cooling box
Automatic positioning system for three glass and special-shaped
glass lamination
New automatic butyl extruder machine
Introduction :
Fully automatic butyl extruder machine can line with the insulating
glass assembly line to realize fully automatic production, and the
whole coating process does not need manual work. This automatic
butyl extruder machine consists of pressing wheel system (linear
pressing wheel, arc pressing wheel), centering wheel, glue nozzle
unit, extrusion unit, transmission unit, rotation mechanism,
support mechanism, frame unit, pneumatic system, hydraulic system
and control system.
Machine features:
(1) There is the alarm device, it will automatically alarm when
there is no glue (there will be a prompt on the touch screen);
(2) Timing heating function, workers can set the start-up time of
the equipment in advance, the equipment will automatically start
the system heating before the official work quickly.
(3) Automatically adjust the distance between front and back glue
nozzles according to the width of aluminum spacer.
(4) The transmission motor is controlled by servo motor, and the
transmission speed can reach up to 50m / min.
(5) Large frame support mechanism, to prevent large-scale aluminum
frame from shaking by a wide margin at the corner, resulting in
frame deformation.
(6) Simple, stable and reliable operation, precise coating effect,
fast coating speed and high production efficiency.
Parameters:
| Voltage | 3P 380+N+PE |
| Power | 8.5kw |
| Coating speed | 0~50m/min |
| Minimum spacer size | 400*400mm |
| Maximum spacer size | 2400*2200mm |
| Spacer width | 6~24mm |
| Heating temperature | 100~140°C |
| Gas pressure | 0.6 MPa |
| Extrusion pressure | 17MPa |
| System pressure | 30MPa |
| Dimension (L*W*H) | 8550×1500×3500mm |
| Weight | 3000Kg |
