Freezer for insulating glass and golden partner machine sealant pum
Freezer LJSGF01
Application
The LJLX01 freezer is used for short-term cooling and heating of
the spreading gun of the sealant spreader without cleaning and
cleaning the spreading gun. The use of this machine can reduce the
waste of sealant for cleaning guns, reduce production costs, and
greatly improve work efficiency.
The LJLX01 freezer is one of the auxiliary equipment for the
production of insulating glass by the sealant spreader. It has the
following characteristics: small footprint, easy movement, high
reliability, and easy maintenance.
Main feature
- It is used for storing the gun when manual silicone extruder machine glue gun stop work during the process of gluing insulating glass
- Storing at low temperature,to prevent sealant solidify
- Apply to polysulfide and silicone
- Can be effectively reduced waste when cleaning the glue
Technical data
| Max refrigerating temperature | 70ºC |
| Min heating temperature | -40ºC |
| Total power | 3.8kw |
| Refrigerating | <150min |
| Overall dimension | 1550*60*1300mm |
Application
The LJLX01 freezer is used for short-term cooling and heating of
the spreading gun of the sealant spreader without cleaning and
cleaning the spreading gun. The use of this machine can reduce the
waste of sealant for cleaning guns, reduce production costs, and
greatly improve work efficiency.
The LJLX01 freezer is one of the auxiliary equipment for the
production of insulating glass by the sealant spreader. It has the
following characteristics: small footprint, easy movement, high
reliability, and easy maintenance.
Technical Instruction
1 .The freezer adopts the most advanced refrigeration system in the
United States, and its core components (scroll compressor) are
characterized by high efficiency, low noise, and high reliability.
The operator can adjust the working parameters at any time, and the
temperature status of the hot and cold barrels is clearly displayed
on the screen.
2 .Structural features and functions
LJLX01 freezer is composed of bracket, refrigeration unit,
refrigeration barrel, heating barrel, electrical control system,
etc.
2.1 The refrigeration of antifreeze is accomplished by the
combination of refrigeration unit and refrigeration barrel.
There is a commercial refrigerant in the storage tank of the
compressor unit, which is a colorless gas at normal temperature,
but a colorless liquid at its own pressure. When the compressor is
in a gas state, the compressor will compress it at high pressure;
it passes the condenser and releases heat through the fins, and
finally condenses into a liquid state. Since the liquid refrigerant
loses the pressure from the condenser after passing through the
volume tube, it immediately becomes gaseous when it passes through
the evaporator outside the refrigerator barrel. At the same time,
since the liquid will lower the temperature when it becomes a gas,
it will absorb latent heat from the antifreeze in the barrel,
thereby reducing the temperature of the refrigerant. Then, the
gaseous refrigerant in the evaporator will be pressed back to the
condenser by the compressor and become liquid. This cycle is
repeated again and again to take away the heat of the antifreeze.
The refrigerant in the refrigeration barrel is a mixture of
ethylene glycol and water with a mixing ratio of 1:1. After
inserting the spreading gun into the barrel, the water level should
be 2 to 3 cm lower than the stopper.
2.2 The heating barrel is heated by two heaters through the
external brown alkali to increase the temperature of the internal
water. The water level is the same as that of the refrigerated
bucket.
2.3 The control part in the panel consists of temperature
controller and switch. It uses a digital temperature controller
that can be turned on or off at any time, and adjusts the
temperature of hot and cold barrels.
Parameter
| Power | Voltage(V) | 380 |
| Frequency(Hz) | 50 |
| Total Power | kW | 3.8 |
| Max. Heating Temperature | ℃ | 70 |
| Max. Refrigerating Temperature | ℃ | -40 |
| Weight | kg | ≈100 |
| Dimension | L×W×H(mm) | 1400×600×1000 |
| Capacity | L | 40 |
