Breathable Non latex 99% 3 Ply Disposable Face Mask

Non Woven Face Mask/Disposable Face Mask/3 Ply Face Mask

Specification:

Please Follow the Instructions Below before Using

1. Open the Package and Hold the Mask in Hands. The Face with Nose Clip is the Front Face. Avoid Contact with the Internal Side of the Mask. Put the Fingertip on the Nose Clip and Have the Elastic Cords Hung Naturally.

2. With the Nose Clip Facing Upwards, Have the Mask Attached to the Chin. Then Buckle Up the Upper Cords Behind Your Ears and The Lower Cords around Your Neck.

3. Use the Index Finger of Both Hands to Pinch the Metal Strip or Stiff Edge of the Mask Sideways from the Middle So It Takes the Shape of Your Nose Bridge. Make Sure the Mask Fits Your Face-Shape.

4. When Removing the Mask, Avoid Touching the Front of the Mask (The Front of the Mask is Contaminated). Only Touch the Ear Ties and Throw the Mask into the Medical Waste Container.

Please Kindly Note:

1. After Ethylene Oxide Sterilization, the Sterility Remains Valid for Two Years.

2. The Date of Sterilization Is Printed on the Outer Package Box.

3. Check Whether the Package is Intact Before Use. Confirm the Label, Production Date and Validity Period of Sterility. Use Within the Validity Period of Sterility.

4. Do Not Use If the Package is Damaged.

5. The Product Should Be Used As Soon As Possible After The Package is Opened.

6. This Product is Disposable and Forbidden to Reuse. After Use, Please Dispose In Accordance With The Requirements of "Regulations of Medical Waste".

Features:

1. Size: 15 x 9cm, 17.5 x 9cm, 17.5 x 9.5cm.
2. Distinguish with appearance: Sewing edge; Folded edge;
3. Colors: White/blue/black/pink/yellow/green.
4. Conform to GB/T32610-2016 by CNAS authorized Labs
5. Bacterial filtration efficiency (BFE %) > 99%.
6. Particulate filtration efficiency (PFE %) > 95%.

7. Breathing Resistance (Delta P) <5.0
8. Fiberglass and latex free for skin friendly.
9. Adaptable nose fixing.

Company Introduction:

Jiangyin Gennotek is a company specializing in the manufacturing and trading of Disposable Face Mask and respirators for both personal protection equipments (PPE) and medical application.

Our company has implemented a strict quality management (QMS) and has passed ISO13485 certification. Our main products are 3 layers disposable face mask with high efficiency PFE 95% and BFE 99%, tested by the CNAS authorized labs listed on European Safety Federation official website with authentic test reports. We can also supply the medical / surgical face mask qualified for EN14683 standard from European Union (EU).

In order to control the quality on the core material, we have invested million US dollars on a fully automatic producing equipment in 1600mm width, to produce the Melt Blown non woven fabrics at our own site.

With Superior products and services, our company had been winning the trust even in the market in Japan's chain drug stores who is the most serious on quality for 8 Million pcs helping to win the high end market.

FAQ:

1.Q: Are you a factory or trading company? A:We are a large-scale factory integrating R&D, production and sales.

2.Q: Where is your factory located? How can I visit there? A:Our company and facctory is located in Henan.You also can come here by air in Xinzheng Airport.All our clients, from home or abroad, are warmly welcome to visit us!

3.Q: When can I get the price? A:Usually we quote within 24 hours after we get your inquiry.

4.Q: How can I get some samples? A:1,We are honored to offer you samples. New clients are expected to pay for the courier cost, the samples are free for you, this charge will be deducted from the payment for formal order. 2,Regarding the courier cost: you can arrange a RPI (remote pick-up) service upon Fedex, UPS, DHL, TNT, etc. to have the samples collected; or inform us your DHL collection account. Then you can pay the freight direct to your local carrier company.

Jiangyin Gennotek Medical Products Co.,Ltd. was founded in 2015 and is located in Jiangyin which is neighboring Shanghai for a 2 hours driving and enjoying convenient transportation. We are specialized in manufacturing Melt Blown Non Woven Fabrics, Disposable Face Mask and Respirators for both personal protective equipments (PPE) and medical application. Jiangyin Gennotek has a 100,000 grade clean workshop, 120 front-line workers and passed the ISO9001 quality system.

Depending on advanced production equipment, perfect testing means and quality assurance system, Jiangyin Gennotek ensure high quality of our products for all of the customers and stakeholders, and we keep strengthening manufacturing management and quality control, focusing on the development of new products, and developing by innovation.

After years of development, product quality has been recognized by international customers. Ever since its inception, we have established long term and stable cooperative relationships with customers from more than 10 countries and areas including Europe, Japan, South Korea, South America and Africa. Our company enjoy high visibility and good reputation both at home and abroad, is the focal point of medical consumables export enterprises.

In case you need more information or cooperation about our products, please do not hesitate to contact us and we shall be very pleased to help you at any time.