Single Use Japan Export Quality 4 Pleats Flat Earloop Comfortable
Wear Disposable Face Mask
Features:
| No. | BFE≥99%, PFE≥95% |
| 1 | Structure of 3 ply as 25gsm spunbond + 25gsm Melt Blown + 25gsm |
| 2 | Size: 175*95mm |
| 3 | Design of 4 pleats, giving enough space between lips and mask,
healthier and more breathable, especially good for lady who wearing
lipstick |
| 4 | Flat latex-free earloop, reducing pressure to ear efficiently |
| 5 | Plastic flexible nose fixing |
Note:
1) Non-medical for civilian protection.
2) Single use /Disposable.
3) White/blue as option.
4) GB/T32610-2016 test report by CNAS authorized Labs listed on
European Safely Federation offcial web.
5) 50 pcs in a pack, 72 packs ( 3600 pcs) in a carton.
6) 216 cartons/40HQ.
7) Customized packing is available.
8) Daily Capacity 500,000 pcs.
Advantage:
3 layer structure for being anti-allergy, anti-bacteria and
breathable
Middle layer as Melt-blown non-woven fabrics for 95% filtering
efficiency.
Fixing strip on nose for adjusting and tightness fitting.
Earloop ultrasonically welded for comfortable wearing experience.
Intended Use: The intended use of a disposable face mask is to help prevent
large particles expelled by the wearer (e.g. sneezing, coughing),
and stop the droplets in the daily environment from contacting the
wearer’s lips or skin.
Wearing: Disposable face masks are typically donned for a specific
procedure. Disposing after 4-6 hours of wearing is highly advised
during each procedure or activity.
Fitting: Flat face mask are not designed to pass a fit test. It fits
loosely over the face leaving gaps between the mask and face which
is inevitable but It is unlikely that most of the air will pass
through the mask material.
Structure: 3 ply layers, flat type, earloops ultrasonically welded at the
outside of the mask body.
Material: 3 ply as outside 25gsm non-woven + 25gsm melt blown filter +
inside 25gsm non-woven
Our Workshop
